REAR PANEL

DIRECT OUTPUT – An XLR balanced direct output is provided for connection to a PA system or directly into a recording studio console or D/A converter. This signal comes directly from the Tube buffered input stage to the Direct Output. The Direct Out signal may be switched between mic and line level, pre and post EQ, and the audio signal ground may be connected or lifted from pin 1 to eliminate hum due to ground loops. This output is fully protected against 48 volt phantom power and may be used for driving microphone lines of over 300 feet without problems.

TUNER OUTPUT – The Streamliner™ 900 is equipped with a fully isolated Tuner Output. This jack is buffered right off of the input jack and before any preamp tubes. This output may also be used to drive a separate direct box or high-impedance recording device where an uncolored signal path is desired. The Tuner Output remains active when the amplifier is muted, allowing for silent tuning on stage.

AUX INPUT – A 1/4” unbalanced line level aux. input is provided that sums directly to the main output bus, controlled by the master volume control. This input is ideal for practicing with recorded tracks from a CD player, IPOD, or MP-3 player. This input is a tip-ring-sleeve type jack with built-in summing resistors that sum left and right signals when used with a stereo cable. This input will also work with a mono tip-sleeve plug. Adjust the level of the playback source to balance with the bass guitar’s volume.

EFFECTS LOOP – A rear panel effects loop (SEND and RECEIVE jacks) is provided for connecting line level “serial” outboard devices such as compressors and may also be used for parallel type outboard devices (delays, reverbs, harmonizers, octavers etc.) by using the mix control located on the outboard device. This loop is located right before the Master Volume control and is also intended as a Preamp Out / Power Amp In connection for possible “chaining” of amplifiers in a Master / Slave configuration. The effects “loop” contains a “normal switch” in the receive jack that interrupts the signal path when a plug is inserted into the receive jack. The send jack may be used as a Post-EQ Aux. output without breaking the signal path. The Master Volume control adjusts the volume of any signal input through the Effects Return jack.

HEADPHONE OUT – A 1/4” TRS jack is provided for connection to headphones for silent practice use. The speaker output is not automatically muted. The speaker outputs should be manually disconnected. It is never an issue

for the Streamliner™ to be used without a speaker load connected. Do not connect this output to anything but headphones.

Page 3 Page 5
Page 4
Image 4
Genz-Benz 900 owner manual Rear Panel
Page 3 Page 5

900 specifications

The Genz-Benz 900 is a distinguished bass amplifier that has made a significant mark in the music industry, particularly among professional bassists and venues requiring top-notch audio performance. Renowned for its powerful output and innovative technologies, the Genz-Benz 900 has become a preferred choice for many musicians seeking reliability and exceptional sound quality.

One of the primary features of the Genz-Benz 900 is its robust 900-watt power output, which allows it to deliver an impressive dynamic range. This power enables the amp to handle everything from subtle nuances to heavy-hitting bass lines without losing clarity or warmth. The amplifier incorporates advanced Class D technology, which not only ensures high efficiency but also keeps the unit lightweight and portable, making it ideal for gigging musicians.

The Genz-Benz 900 is equipped with an extensive equalization section, featuring a three-band EQ with a sweepable midrange control. This range of controls allows users to shape their tone to perfection, adapting to various music genres and performance settings. The onboard digital signal processing includes multiple presets and effects, providing versatility to create unique sounds that stand out in any mix.

Additionally, the amplifier features a built-in compressor, which helps to even out the dynamics of a player's performance. This compression not only enhances sustain but also contributes to a more polished sound, making it easier for bassists to achieve their desired tone regardless of playing style.

Connectivity is another strongpoint of the Genz-Benz 900. The amp offers multiple input options, including a dedicated XLR input for direct recording or sound reinforcement use, as well as standard 1/4-inch inputs. The output section also includes various options for interfacing with cabinets or sound systems, including a speakON output, allowing users to connect their rig seamlessly to a variety of setups.

Durability is a key characteristic of the Genz-Benz 900; it is designed to withstand the rigors of the road while maintaining consistent performance. The sleek, rugged chassis and high-quality components ensure reliability during even the most demanding gigs.

In summary, the Genz-Benz 900 is a powerful and versatile bass amplifier, boasting advanced technologies and robust features that cater to the needs of professional musicians. Its blend of performance, portability, and tonal flexibility makes it a standout choice in the world of bass amplification. Whether on stage or in the studio, the Genz-Benz 900 delivers superb audio quality that elevates any performance.
Top Page Image Contents