Genz Benz Enclosures, Tube Works, Warranty

above unity, but noisy signal will be the result, as well as less headroom.

5). A final check for effects loop matching vs. normal levels in your amp is to play a chord, then guickly remove the “Effects In” plug and see if there is an increase or decrease in volume. Then further adjust the receive gain to match the normal level within the amp to keep over-all headroom and power at optimum.

6). The use of multiple effects complicates the procedure greatly, but the following rule also applies. Simply think of the output of each effect as the “send” for the following unit.

GENERAL RULE OF THUMB: “Send with as much level as you can without distorting the effect. “Receive” with the minimum level possible to reach unity gain with or without the effect activated.

WARNING!!

The use and operation of this device constitutes an agreement of full release of any and all liability connected with such use. Only personnel familiar with the safe use and operation high-power audio equipment should attempt to operate this device.

In addition, by the use of this device, user agrees to hold both Genz Benz/Tube Works, its designers, sales agents and all other affiliates and related parties harmless in the event of any accident, damage or loss resulting from such use.

Manufacturer’s sole responsibility is to provide a warranty on the specified performance of the product under normal

WARRANTY

Your TUBE WORKS product is warranted for a period of three years against defects in workmanship or materials in the electronic components. The speaker(s), reverb tank and cabinet are warranted for a period of ninety (90) days from date of purchase. This warranty applies only to the original registered owner provided he/she has returned a completed Owners Registration Card within fifteen (15) days of purchase.

This warranty covers parts and labor only; shipping charges remain the sole responsibility of the owner.

Damage due to misuse, modification or abuse is excluded from this warranty.

Before returning any unit for service, a

RETURNED MERCHANDISE

AUTHORIZATION NUMBER (RMA#) must be obtained by calling 480-941-0705 during normal

Tube Works

a division of