NEC MD213MG manual NEC Display Solutions, Park Boulevard, Suite Itasca, IL 866-NEC-MORE

Model MultiSync MD213MG

Achieve complete and brightness uniformity. By nature, LCD panels contain uniformity errors, which are visible as slightly brighter or darker areas on the screen. To combat this inherent trait, each MultiSync MD213MG display is individually characterized during production using a fully automated system that measures multiple points across the screen at different gray levels. These measurements are used to build a 3-D correction matrix stored inside the display. This data is used to compensate for the uniformity not only as a function of position on the screen but of gray level as well. In turn, this technology reduces the non-uniformity to virtually unnoticeable levels and applies a digital correction to each pixel on the screen to compensate for differences in luminance.

Display	21.3"
Viewable Size Image
Pixel Pitch	0.21mm
Pixels Per Inch	120
Brightness (typical)	400 cd/m2 calibrated / 1450 cd/m2 max
Contrast Ratio (typical)	900:1
Viewing Angle (typical)	176° Vert., 176° Hor. (88U/88D/88L/88R)@ CR>10
Response Time (typical)	Rapid Response™ 24ms (12ms Gray-to-Gray)
Panel Bit Depth	12-bit internal LUTs, displays up to 1024 shades of gray out of 4096
Synchronization Range	31.5 - 93.8 KHz (Analog) / 31.5 - 95.4 KHz (Digital)
Horizontal
Vertical	50 - 85 Hz
Video Bandwidth	25.2 - 209.3 MHz (DualLink)
Input Signal	Analog RGB 0.7 Vp-p/75 Ohms
Video
Sync	Separate sync: TTL Level (Positive/Negative)
	Composite sync: TTL Level (Positive/Negative)
	Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)
Inputs	DVI-D and DVI-I
Resolutions Supported (Analog/Digital)	640 x 400 @ 70-85 Hz*	1600 x 1200 @ 60-75 Hz
	720 x 400 @ 70-85 Hz	1920 x 1200 @ 60 Hz
	640 x 480 @ 60-85 Hz	2048 x 1536 @ 60 Hz
	800 x 600 @ 56-85 Hz
	832 x 624 @ 75 Hz
	1024 x 768 @ 60-85 Hz
	1152 x 864 @ 70-85 Hz
	1152 x 870 @ 75 Hz
	1280 x 960 @ 60 Hz
	1280 x 1024 @ 60-85 Hz
Native Resolution	2048 x 1536 @ 60 Hz landscape / 1536 x 2048 @ 60 Hz portrait
Additional Features	Ultra-thin frame (bezel), No Touch Auto Adjust™, VESA Mount,
	tilt, swivel, height-adjustable stand (5.9 in./150mm), pivot, vacation
	switch, 12-bit LUTs, black level adjustment, AmbiBright, ColorComp
	uniformity correction, overdrive, Analog/Digital CableComp™, Gam-
	maComp™ MD software, standalone calibration

	50.0
	45.0
	40.0
	35.0
	30.0
	25.0					B e for e
						A fte r
	20.0
	15.0
	10.0
Ambient	5.0
light	0.0
	0	20	40	60	80	100

For optimal image viewing in any lighting condition, the MD213MGs built-in ambient light sensor can automatically adjust the calibration of the display to suit the environment.

For consistent image quality, the built-in front sensor constantly monitors and maintains brightness for optimal DICOM GSDF calibration. For non- assisted conformance, calibration and reporting functions, the sensor is capable of measuring monitor brightness, whitepoint and contrast response.

The MD213MG’s design allows you to adjust the display to your exact ergonomic preferences. In addition to

tilt and swivel functionality, the height adjusts up to 150mm, and the display pivots between landscape to portrait orientations.

Voltage Rating	AC 100-120V / AC 220-240V
Power Consumption (typical)	100W
On
Power Savings Mode	2W
Dimensions (WxHxD)	18. x 17.1 - 23 x 12 in. / 467.8 x 434.3 - 584.3 x 306mm
Net (with stand)
Net (without stand)	18.4 x 14.2 x 4.4 in. / 467.8 x 361.6 x 110.7mm
Net Weight	23.5 lbs. / 10.7 kg
(with stand)
(without stand)	16.5 lbs. / 7.5 kg
VESA Hole Configuration	100 x 100mm
Specifications
Environmental Conditions	5-35° C / 41-95° F
Operating Temperature
Operating Humidity	30-80%
Operating Altitude	3000m / 9842 ft.
Storage Temperature	-10-60° C / 14-140° F
Storage Humidity	10-85%
Storage Altitude	12,192m / 40,000 ft.
Safety Standards	UL/C-UL, UL60601-1, Gost/PCT, PSB, CCC, FCC Class B/Canadian
	DOC, C-tick, MPR II / MPR III, VCCI (class 2), JIS C 61000-3-2, static
	electricity guideline, low emission guideline, ISO9241-307, TCO
	‘03, TCO ‘6, US Mercury regulations, WEEE, RoHs, SASO, Energy
	Star, J-Moss, FDA 510k pending, CE-MDD, IRAM, TUV GM, EPEAT,
	AAPM-TG-18, DIN V 6868-587 (Germany) CATB
Limited Warranty**	5 years parts and labor, including Advanced Overnight Exchange

* Digital only

**Backlight usage limited to 500 cd/m2 or less for entire duration of warranty

MultiSync is a registered trademark, and ColorComp and GammaComp are trademarks of NEC Display Solutions. All other brand or product names are trademarks or registered trademarks of their respective holders. Product specifications subject to change. 3/09 Ver. 2.

©2009 NEC Display Solutions of America, Inc. All rights reserved.

NEC Display Solutions

500 Park Boulevard, Suite 1100

Itasca, IL 60143

866-NEC-MORE