Genz-Benz EL DIABLO 60 owner manual Features, Amplifier Overview

FEATURES:

•Pentode 60 Watt/Triode 30 Watt Output Section

•Two Versatile Tube Channels

•Four Button Footswitch Included

•Master Effects Loop

•Frequency Compensated D.I. Section

•Accutronics® Long Pan Reverb

•GBE 1240-V75 Loudspeaker (combo version)

•Six Triode Preamp Stages (3-12AX7’s)

•Two Power Tubes (w/Ruby Tubes™ EL 34’s)

•Military Spec. Double-sided Glass Epoxy Circuit Boards

•All Custom Wound Transformers

•Transformer Based Phase Inverter for Optimum Power Tube Grid Drive

•Heavy-duty Steel Chassis, Mounted within a Sturdy Birch Plywood Cabinet

CAUTIONS AND WARNINGS:

•Tube amplifi ers, especially high-powered tube amps, generate heat. Allow at least 4 inches (60mm) of clearance around the back of the amplifi er cabinet. Keep clear of curtains and other fl ammable materials. Avoid contact with hot tubes.

•Do not expose amplifi er to moisture, rain, splashed water, beverages, etc.

•Be sure that a speaker load is connected to the amplifi er before applying power; otherwise damage to the amplifi er could result.

•Be sure that the amplifi er is properly grounded. Do not defeat the ground pin on the AC power input plug. The ground is there to protect the user from the possibility of shock.

•Be sure that the AC power (mains) voltage selector switch is confi gured for the proper voltage (115 volts or 230 volts) for the area you are located before connecting the amplifi er to the power source. In the event of a thunderstorm, remove the power plug from the wall socket to prevent damage due to the possibility of lightening strikes.

•Turn off power to the amplifi er (or place in standby) when changing wiring connections to prevent damage to speakers from possible (and unexpected) loud noises.

•WARNING: This amplifi er is capable of extreme high decibel output. Always protect your hearing. Your hearing is an invaluable tool in appreciating the tone of EL DIABLO 60.

•There are no user-serviceable parts inside the chassis. Refer all service to qualifi ed service personnel.

•Always unplug the amp when changing the power or preamp tubes. Never touch the tubes if they are still hot.

•Always wait to move the amp after use until the tubes have cooled. This will prevent tube damage and extend tube life. A few minutes should be suffi cient.

•While we have made every attempt to outline all general cautions, the ultimate responsibility for safe operation of this or any amplifi er product rests with the consumer. Common sense should be practiced at all times when using the amplifi er.

AMPLIFIER OVERVIEW:

The GENZ BENZ EL DIABLO 60 contains a unique combination of circuits, including vintage tube circuits, carefully engineered “hot-rod” tube circuits and advanced tone shaping techniques. EL DIABLO 60 delivers unique tone, drive and versatility, which is exemplifi ed by the 10 distinctive tone variations easily accessible through the four button footswitch (included). This fl exibility allows endless possibilities to craft your own personal repertoire of tone and expression.

The unique PENTODE / TRIODE design of the tube amplifi er adds to the versatility of the EL DIABLO 60— essentially 2 different amps in one!! In the 60-watt PENTODE MODE the amp responds with its bold, “spanky”, rich clean tone and classic overdrive sustain, all the way into aggressive Hi Gain brutality and all points in between. With the 30-watt TRIODE MODE the El Diablo 60 produces a more vintage, fuller, fatter tone with a more dynamic response and increased power tube break-up with a darker complexity. Experimentation with all of this fl exibility will reward you with a tremendous tonal pallet for your specifi c playing style or song selection.

2