6
Specications
STL6-2
Rated Power: 375W/8ohms
600W/4ohms
Dimensions: 2.5”H X 10”W X 10.50”D
Weight: 3.75 LBS
STL6-2-12T COMBO - This model produces 375 watts into the 8 ohm combo conguration and 600 watts when used
with an additional 8 ohm extension cabinet. It will be necessary to use a Neutrik Speak-On™ connection when using an
extension cabinet with this combo. The speaker is our proprietary high power GBE 12350, high energy 12” Neodymium
cast frame driver coupled with our GBE 4941 tweeter. A 100 watt tweeter level control is provided to adjust the output of
the tweeter.
STL6-2-210T COMBO -This larger model produces 375 watts into the 8 ohm combo conguration and 600 watts when
used with an additional 8 ohm extension cabinet. It will be necessary to use a Neutrik Speak-On™ connection when using
an extension cabinet with this combo. The combo is loaded with our proprietary high energy GBE 10300, 10” cast frame
Neodymium drivers coupled with our GBE 4941 tweeter. A 100 watt tweeter level control is provided to adjust the output of
the tweeter.
STL-2-12T EXTENSION CABINET --- An 8 ohm extension cabinet is available for adding on to the SHUTTLE® combo.
This model is the exact same cabinet conguration as the STL6-2-12T.
STL-2-210T EXTENSION CABINET --- An 8 ohm extension cabinet is available for adding on to the SHUTTLE® combo.
This model is the exact same cabinet conguration as the STL6-2-210T.
BLOCK DIAGRAM
SAFE OPERATING REQUIREMENTS:
• Never set an amplier on anything that will tip over or collapse under its weight.
• Provide a minimum distance of 25.4 mm (1 inch) around all sides of the amplier for sufcient ventilation. The
ventilation should not be impeded by covering the amplier’s vent openings with items such as newspapers, tablecloths,
curtains, etc.
• No naked ame sources, such as lighted candles, should be placed on the SHUTTLE®6.2 amplier.
• This amplier should not be exposed to dripping or splashing and no objects lled with liquids, such as vases or drinks,
should be placed on this product.
• The SHUTTLE®6.2 amplier should be connected to a mains socket outlet (power receptacle) with a protective earth
(ground) connection at all times.
• The ampliers mains plug (power plug) is considered the disconnect device and the connection must remain accessible
at all times.
• This amplier is capable of producing sound pressure levels that may cause hearing loss.
• There are no user serviceable parts and hazardous operating voltages are present inside this unit. Always consult a
qualied repair facility for service.
STL6-2-12T
Rated Power: 375W/8ohms
600W/4ohms
Dimensions: 21.75”H X 18”W X 16”D
Weight: 32 LBS
STL6-2-210T
Rated Power: 375W/8ohms
600W/4ohms
Dimensions: 27.75”H X 18”W X 16”D
Weight: 43 LBS