Gianni Industries Auxiliary reader, DG-30 Digital Keypad / Proximity Entry System, Gemprox-H

DG-30

Digital Keypad / Proximity Entry System

Auxiliary reader

The auxiliary reader must not be further than 50 meters from the DG-30. Also this reader should be nearer than 60 centimeters, to avoid disturbance. The suggested wire gauge is #22~26 AWG. Split of units for DG-30 and auxiliary reader in ranging up to 50 M bring out the friendly system device for low cost but high security with anti-tampering as well as convenience and reliability.

GEMPROX-H

125KHz,Wiegand 26~37-bit format output

GEMPROX-E

125KHz,Wiegand 26-bit format output

GEMPROX-26M

13.56MHz,Wiegand 26-bit format output, Mifare 1 compatible

Connecting Diagram

Auxiliary Reader

(Wiegand 26 or

34-bit Format)

Door Reed Switch Input for Anti-Trailing
Contact door reed switch
This reed switch is used to reset the re-
locking time to 0 second when the door is
moved. (Using N.O. contact in case of	Push Button
door closed, changeover to N.C. When
door is moved)

FAIL-SAFE	Power Supply
LOCKING DEVICE

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,

Tu-Cheng City, Taipei, Taiwan 23678

Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876

E-Mail: info@gianni.com.tw

Website: gianni.tw

Tamper switch contact output (free voltage contact)

Tamper

Switch

To follow the precedent of Group 1 contacts

1 2 3

Re-set of all

system parameter

The products are manufactured under an ISO 9 0 0 1 & Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y Management Program environment back its product quality, performance and commitment to customer satisfaction.

Copyright 2008 Gianni industries, inc. All rights reserved. DM-CA-DG-30 Ver. D Published on 2008.05.06