Auxiliary reader, Gemprox-E, Connecting Diagram

Auxiliary reader

GEMPROX-E

125KHz, Wiegand 26-bit hexadecimal format output Size:88(L) X 44(W)X16(D)mm

Connecting Diagram

Fail-Safe Lock

St 2 connect to 1-2

Fail-Secure Lock

St 2 connect to 2-3

Power supply (9~16Vdc)

*Linear supply recommended

Insert 2-3 position to reset

DG-600E Jp1 leads to Wiegand 44 bits format

DG-600E Jp1 short-circuit to Wiegand 26 bits format

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,

Tu-Cheng City, Taipei, Taiwan 23678

Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876

E-Mail: info@gianni.com.tw

Website: gianni.tw

DG-600E

Stand-alone Proximity Reader

The auxiliary reader must not be further than 50 meters from the DG-600E. Also this reader should be nearer than 60 centimeters, to avoid disturbance. The suggested wire gauge is #22~26 AWG. Split of units for DG-600E and auxiliary reader in ranging up to 50 M bring out the friendly system device for low cost but high security with anti-tampering as well as convenience and reliability.

Contact door switch or the

electric lock signal output

Push Button

External relay start

the warning system

Auxiliary Reader

(Wiegand Format)

Connect to 1-2;C and D contact is N.C.

Connect to 2-3; for N.O.

Connect to 1-2;C and A contact is N.C.

Connect to 2-3; for N.O.

The products are manufactured under an ISO 9 0 0 1 & Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y Management Program environment back its product quality, performance and commitment to customer satisfaction.

Gianni Industries EM-400x Auxiliary reader, DG-600E Stand-alone Proximity Reader, Gemprox-E

Models: DG-600E EM-400x