Easy Programming
ADD state
Read the Master Tag once
GREEN lamp to
start flashing
1
Delete Tags
Read the Master Tag twice
RED lamp to start flashing
2
Clear Memory
Read the Master Tag three times
| YELLOW and RED |
3 | lamps to start flashing |
Easiprox-ANSI Stand-Alone Proximity Access Control System
Optional Accessory
The Tag Simulator is used to add and delete any card/tag number from the reader memory when the tag is lost or not available.
TS-980 simulator
Unit size : 120 L x 54 W x 38 H mm
Weight : 180 g
Operating distance : less than 60 mm
Battery : PP3 - 9V
Operating distance
less than 6 cm
Time Adjust and Toggle Mode Selection Read the Master Tag four times
| Wait for the YELLOW |
4 | lamp to start flashing |
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road,
Tel:
Website: gianni.tw
Warranty
The product is warranted against defects in material and workmanship while used in normal service for a period of 1 year from the date of sale to the original customer. The GEM policy is one of continual development and improvement; therefore GEM reserves the right to change specifications without notice.
The products are manufactured under an ISO 9 0 0 1 & Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y Management Program environment back its product quality, performance and commitment to customer satisfaction.
Copyright 2008 Gianni industries, inc. All rights reserved.
