| Specifications |
| Model GXR Series |
GXR2224 | 2.2 GPM @ 2400 PSI |
GXR2424 | 2.4 GPM @ 2400 PSI |
Maximum Inlet Pressure | Up to 90 PSIG1 |
RPM | 3450 |
Plunger Diameter | 16mm |
Stroke GXR2224 | 4.7mm (6.1 o angle) |
Stroke GXR2424 | 5.1mm (6.3 o angle) |
Crankcase Oil Capacity | 4.7 fl. oz. (4.1 fl.oz. horizontal) |
Temperature of Pumped Fluids | ............................................................ Up to 80 oF |
Inlet Port | 1/2" NPT |
Discharge Ports | 3/8" NPT |
Shaft Rotation | Either Direction2 |
Weight | 9 lbs. |
Width | 8.325" |
Height | 6.45" |
Swash Plate Bore (Horizontal) | 3/4" x 3/16" Keyway |
Swash Plate Bore (Vertical) | 7/8" x 3/16" Keyway |
Valve Type | Polyamide Plastic |
1A 25 PSIG minimum inlet pressure is required.
2The pump itself can be driven in either direction of rotation; however, the cooling fan on TEFC motors must always be positioned so that the cooling air is drawn from the
GXR2224 ELECTRIC HORSEPOWER
REQUIREMENTS
RPM GPM 1000 PSI 1500 PSI 2000 PSI 2500 PSI
3450 | 2.2 | 1.5 | 2.3 | 3.0 | 3.8 |
GXR2224 GAS ENGINE HORSEPOWER
REQUIREMENTS*
RPM GPM 1000 PSI 1500 PSI 2000 PSI 2500 PSI
3450 | 2.2 | 2.0 | 3.0 | 4.0 | 5.0 |
HORSEPOWER RATINGS:
The rating shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horse- power requirements, use the Follow- ing formula:
GXR2424 ELECTRIC HORSEPOWER
REQUIREMENTS
RPM | GPM | 1000PSI | 1500PSI | 2000PSI | 2400 PSI | |
3450 | 2.4 | 1.6 | 2.5 | 3.3 | 3.9 |
|
Electric HP = (GPM X PSI) / 1460
Gas HP = (GPM X PSI) / 1100
GXR2424 GAS ENGINE HORSEPOWER
REQUIREMENTS*
RPM | GPM | 1000PSI | 1500PSI | 2000PSI | 2400 PSI | |
3450 | 2.4 | 2.2 | 3.3 | 4.4 | 5.2 |
|
*Engine power varies based on horizontal or vertical orientation as well as by makes and model from each manufacturer.