Gigabyte GA-7VA1004 - page 48

- 42 -GA-7VA Motherboard
English
FPCI/AGP Frequency (MHz)
8The values depend on CPU Host Frequency(Mhz) .
FDRAM Clock (MHz)
8Please set DRAM Clock according to your requirement.
If you use DDR200 DRAM module, please set “DRAM Clock(MHz)” to “100-DDR200”. If you use DDR333
DRAM module, please set “DRAM Clock(MHz)” to “166-DDR333”.
Incorrect using it may cause your system broken. For power End-User use only!
8SPDSet Memory frequency by DRAM SPD data. (Default value)
FCPU OverVoltage Control
Increase CPU voltage may get stable for Over_Clock. But it may damage to CPU when enable this feature.
8NormalSupply voltage as CPU reguired. (Default value)
8+5% / +7.5% / +10%Increase voltage range as user selected.
FAGP OverVoltage Control
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable this
feature.
8NormalSupply voltage as AGP Card reguired. (Default value)
8+0.1V~+.03V Set AGP voltage from 1.6V~1.8V.
FDIMM OverVoltage Control
Increase DRAM voltage may get stable for Over_Clock. But it may damage to DRAM module when enable this
feature.
8NormalSupply voltage as DRAM module reguired. (Default value)
8+0.1V~+.03V Set DIMM voltage from 2.6V~2.8V.