English
Onboard Serial Port 1
Auto | BIOS will automatically setup the port 1 address. |
3F8/IRQ4 | Enable onboard Serial port 1 and address is 3F8. (Default value) |
2F8/IRQ3 | Enable onboard Serial port 1 and address is 2F8. |
3E8/IRQ4 | Enable onboard Serial port 1 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 1 and address is 2E8. |
Disabled | Disable onboard Serial port 1. |
Onboard IrDA Port
Auto | BIOS will automatically setup the port 1 address. |
3F8/IRQ4 | Enable onboard IrDA port and address is 3F8. |
2F8/IRQ3 | Enable onboard IrDA port and address is 2F8. (Default value) |
3E8/IRQ4 | Enable onboard IrDA port and address is 3E8. |
2E8/IRQ3 | Enable onboard IrDA port and address is 2E8. |
Disabled | Disable onboard IrDA port. |
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
IrDA | Set onboard I/O chip UART to IrDA Mode. (Default value) |
ASKIR | Set onboard I/O chip UART to ASKIR Mode. |
UR2 Duplex Mode
This feature allows you to seclect IR mode.
Half | IR Function Duplex Half. (Default value) |
Full | IR Function Duplex Full. |
Onboard Parallel port
Disabled | Disable onboard LPT port. |
378/IRQ7 | Enable onboard LPT port and address is 378/IRQ7. (Default value) |
278/IRQ5 | Enable onboard LPT port and address is 278/IRQ5. |
3BC/IRQ7 | Enable onboard LPT port and address is 3BC/IRQ7. |
Parallel Port Mode
SPP | Using Parallel port as Standard Parallel Port. (Default value) |
EPP | Using Parallel port as Enhanced Parallel Port. |
ECP | Using Parallel port as Extended Capabilities Port. |
ECP+EPP | Using Parallel port as ECP & EPP mode. |
ECP Mode Use DMA
3 | Set ECP Mode Use DMA to 3. (Default value) |
1 | Set ECP Mode Use DMA to 1. |
- 36 - |
