![](/images/new-backgrounds/1168614/16861457x1.webp)
15)IR_CIR
Make sure the pin 1 on the IR device is align with pin one the connector. To enable the IR/CIR function, you are required to purchase an optional IR/CIR module. To use IR function only, please connect IR module to Pin1 to Pin5. Be careful with the polarity of the IR/CIR connector. Check the pin assignment carefully while you connect the IR/CIR cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional IR/CIR cable, please contact your local dealer.
|
| Pin No. | Definition |
|
| 1 | Power |
6 | 10 | 2 | NC |
|
| 3 | IRRX |
1 | 5 | 4 | GND |
|
| 5 | IRTX |
|
| 6 | NC |
|
| 7 | CIRRX |
|
| 8 | +5VSB |
|
| 9 | CIRTX |
|
| 10 | NC |
English
16)F_ USB1 / F_USB2/F_USB3 (Front USB Connector)
Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you connect the front USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional front USB cable, please contact your local dealer.
210
19
Pin No. | Definition |
1 | Power |
2 | Power |
3 | USB DX- |
4 | USB Dy- |
5 | USB DX+ |
6 | USB Dy+ |
7 | GND |
8 | GND |
9 | No Pin |
10 | NC |
|
|
- 29 - | Hardware Installation |