Gigabyte GA-M59SLI-S5 user manual Pwrled, FPANEL Front Panel Jumper, English, Power, Reset Switch

English

12)PWR_LED

The PWR_LED connector is connected with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode.

	Pin No.	Definition
1	1	MPD+
	2	MPD-
	3	MPD-

13) F_PANEL (Front Panel Jumper)

Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis front panel to the F_PANEL connector according to the pin assignment below.

		Speaker Connector
Message LED/
Power/	Power
Sleep LED	Switch

	MSG+ MSG- PW+ PW-	SPEAK+	SPEAK-
	2		20
	1		19
	HD+ HD- RES- RES+ NC
	Reset Switch
	IDE Hard Disk Active LED
HD (IDE Hard Disk Active LED)	Pin 1: LED anode(+)
(Blue)	Pin 2: LED cathode(-)
SPEAK (Speaker Connector)	Pin 1: Power
(Amber)	Pin 2- Pin 3: NC
	Pin 4: Data(-)
RES (Reset Switch)	Open: Normal
(Green)	Close: Reset Hardware System
PW (Power Switch)	Open: Normal
(Red)	Close: Power On/Off
MSG (Message LED/Power/Sleep LED)	Pin 1: LED anode(+)
(Yellow)	Pin 2: LED cathode(-)
NC ( Purple)	NC

GA-M59SLI-S5/GA-M59SLI-S4 Motherboard - 30 -