Gigabyte GN-A11G Chapter 2 QUICK INSTALLATION

GN-A11G Wireless LAN Access Point

Chapter 2 QUICK INSTALLATION

Hardware Requirements

Computer specification for Wireless LAN Access Point:

 One installed 802.11b/g wireless LAN adaptor

 Ethernet converter or hub

 RJ-45 Ethernet cable

System Requirements

 One computer works under Windows, Macintosh or Linux

 If wants to activate AP Manager, it is suggested to use a computer with

Windows OS.

Internet Configuration Requirements

To connect AP Manager with Wireless LAN Access Point, please set up the

following parameters for TCP/IP configuration:

 Static IP Address: 192.168.1.x (e.g, 2~253)

 Subnet Mask: 255.255.255.0

 Default Gateway: 192.168.1.254

7

Contents

Main Wireless LAN Access Point Users Manual Page Contents Chapter 1 Introduction Overview Features Package Contents Rear and side panel Front Panel Chapter 2 QUICK INSTALLATION Hardware Requirements System Requirements Internet Configuration Requirements Hardware installation Connecting AP Linking wired Ethernet Method 1: Static IP address Method 2: Multi-AP configuration Chapter 3 Access Point Manager (AP Manager) Install Access Point Manager Page Page Page Using Access Point Manager Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Firmware upgrade Uninstall AP Manager Utility Page Chapter 4 Web-based configuration Page Page Page Page Page Page Page Page Chapter 5 Troubleshooting Appendix A: Glossary Page Page Appendix B: Specifications Physical Interface Specifications Appendix C: Configuration of the PCs The TCP/IP Settings under Windows 2000 Page Page The TCP/IP Settings underWindows XP Page Page Limited Warranty Statement KEEP THIS STUB FOR YOUR PURCHASING RECORD Customer Satisfaction GIGA-BYTE TECHNOLOGY CO., LTD.