Gigabyte GN-BR01G manual Installation, Installing the Router

Chapter 2 Installation

This chapter covers the installation of the AirCruiser G Wireless Router. Please take note of this as you reach Step 3.

AirCruiser G Wireless Router - Factory Default Settings

SSID (Network Name)	GIGABYTE
Broadcasting SSID	YES
Wireless Security	Open System (OFF)
IP Address of Web Configuration Utility	192.168.1.254

Configuration Utility Username/Password

admin/admin

Installing the Router

Your GIGABYTE AirCruiser G Wireless Router has built-in setup and security configuration software called SmartSetup 3 that will help you configure your router for both Internet access and wireless security. Before you start, make sure your Computer TCP/IP setting is set to “Obtain and IP address automatically” For more information, check Windows Help. Follow the 4 steps below for Quick Installation.

Step 1 With power OFF to all devices; connect your router to your network as shown in the diagram above.

Step 2 Power ON your computer, modem and Router, and then launch either Internet Explorer or Netscape Navigator.

Step 3 SmartSetup 3 should automatically detect your wireless network and open up the web-based configuration screen. Based on your Internet service, you may be required to enter your ISP account’s username and password or other additional information as prompted. See below for screenshots.

4