type. If other types of flue or appliances are fitted, ensure there is adequate ventilation in the room.
All installations must comply with local authority requirements for the discharge of exhaust air.
• Positioning
When installed above a cooking appliance the distance between the surface of the appliance hotplate and the lower grill of the hood must not be less than 65cm (25½”).
This appliance is suitable for ceiling heights of approximately 236cm (7’9") and 273cm (9’0") depending on the installation. If you have a ceiling greater than this height please ring our spares department on 0844 815 3745 for the tall ceiling kit (see Optional Extras).
If the cooker hood is installed for use above a gas appliance then the provision for ventilation must be in accordance with the Gas Safety (Installation and Use) Regulations and the relevant building regulations.
Warning: The fan motor of this cooker hood incorporates a thermal
• Unpacking
Care should be taken when unpacking the cooker hood to ensure that the following parts are not discarded.
-Components
The hood consists of:
1 hood body A complete with controls and lights
1upper mounting structure B.
1lower mounting structure C.
1complete telescopic flue E.
1connecting flange F.
1air deflector M.
1bag containing:-
2 x G screws
14 x I screws
3 x P screws Fixing template Instructions and documents
•Installation Instructions
•Mounting the Cooker Hood
A)With the aid of the paper template placed with the arrow corresponding to the cooker hood control side, mark the centre of the holes and drill 8
mm diameter (Fig.3)holes to suit location. Use 4 or more fixing holes according to the location.
5
