Global Machinery Company 1700W instruction manual Cleaning The Filter, Maintenance

Models: 1700W

1 16
Download 16 pages 16.57 Kb
Page 13
Image 13
CLEANING THE FILTER

8.Press down on the blade spanner (11) to lock it in position under the retaining latch.

9.Return the mower to the upright position and replace the grass box (19).

10.Reconnect the power cable to the supply and run the mower for a few minutes to check that the blade is properly fitted and that there is no undue noise or vibration.

11.Use only the blade as recommended by the manufacturer.

CLEANING THE FILTER

1. To help maintain good airflow within the grass box and thus ensure optimum filling, regularly check and, if necessary, clean the filter (27).

2.Access the filter by using a flat blade screwdriver to prise off the filter cover (26).

3.Take out the filter, wash it in warm, soapy water, rinse it and allow it to dry.

4.Clean out the filter area and replace the filter and the filter cover (26).

Note:

This filter is a consumable item and not a warranty item.

MAINTENANCE

WARNING. Always ensure that the tool is switched off and the plug is removed from the power point before making any adjustments or maintenance procedures.

1.Regularly check that all the fixing screws are tight. They may vibrate loose over time.

2.In order to take up less space when storing the mower, loosen both wing knobs (9) and fold the upper handle (1) over the lower handle (17).

3.When not in use, keep the cord wrapped around the cable tidy.

4.Keep the tool’s air vents accessible when the cover

(13)is raised, unclogged and clean at all times.

5.Remove dust and dirt regularly.

6.Clean inside the mower body and under the deck. Use a brush or damp rag.

7.At the end of the season, give the mower an overall cleaning and a thorough check, including the blade. Have the blade sharpened or replaced if necessary.

8.You can clean out the grass box with a hose or pressure cleaner provided that you first remove it from the mower. Replace the grass box when it is dry.

9.Do not let water come into contact with the motor.

10.Never use chemicals such as petrol or solvents to clean plastic parts.

11.Never disassemble the tool or carry out any repairs.

12.Always have the mower maintained or repaired by a competent person at an authorised service centre.

13

Page 13
Image 13
Global Machinery Company 1700W instruction manual Cleaning The Filter, Maintenance