c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5. Service
a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Additional safety rules for lawn mowers
•Only use this Lawn Mower when a Residual Current Device (RCD) with a tripping current of not more than 30mA is in the circuit.
•If an extension cord is used make sure it is for outdoor use and marked as such. The recommended size of extension cord is not lighter than 1.5mm2 at 30 metres in length or 1.0mm2 at 20 metres in length.
•Completely uncoil your extension cable before use to
prevent overheating and loss of mower efficiency. When tidying away the cable, wind it carefully to avoid kinking.
WARNING. After switching off the machine, the cutting blade continues to rotate for a few more seconds.
•Frequently inspect the condition of the cutting blades. Damaged blades must be replaced immediately. Blunt blades should be sharpened. Follow all the required precautions when replacing the blades.
•Before use check the supply and extension cord for signs of damage or ageing. If the cord becomes damaged during use, disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY.
•Do not use the appliance if the cord is damaged or worn.
•Read the instructions carefully. Be familiar with the controls and proper use of the equipment.
•Keep extension cord away from cutting blades.
•Wear eye and ear protection. Wear dust protection if the mowing action causes the raising of dust or particles. Wear long trousers.
•Never allow children, infirm people or people unfamiliar with these instructions to use the rotary collect mower.
•Avoid using the mower, while people, especially children and the infirm, or pets are nearby.
•Use the mower only in daylight or good artificial light.
•Do not operate the mower unless the grass box is in place.
•Never operate the mower with a damaged base.
•Never operate the appliance with defective guards or shields, or without safety devices, for example deflectors and/or grass catcher, in place.
•When starting up and when the machine is in operation, keep the cutting section away from all parts of the body, especially the hands and feet.
•Do not start the machine when it is not in the operating
5
