Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design:

Damage to the lungs if an effective breathing mask is not worn.

Damage to hearing if effective earmuffs are not worn.

Damage to the eyes if effective safety goggles or shield are not worn.

Warning.

In the event that an air line is cut or broken, the air supply must be turned off at the compressor. A broken air line which is not supported is extremely dangerous and can whip around very quickly, both with the capability of striking people, and blowing foreign particles into the air.

Do not attempt to catch the air line but immediately keep bystanders well clear and turn off the air supply to the hose, turn off the compressor at the On / Off button, and then remove the hose from the compressor.

Contents of carton

400ml of oil in a sealed container

2 Wheel assemblies

( 2 each of axle pins, flat washers, split washers, nuts, wheel caps)

Air filter

Rubber feet assemblies (30L - 1, 40L - 2)

Additional contents for the 40L

Handle with attaching screws (grub screws in plastic bag)

Allen key

8

AC30G_AC40G

8

 

 

12/8/05, 4:48 PM

 

 

 

 

 

Page 8
Image 8
Global Machinery Company AC30G, AC40G instruction manual Contents of carton