Maintenance and repair | P |
General Inspection
Regularly check that all the fixing screws are tight. They may vibrate loose over time (Fig. P).
Maintenance
WARNING. Always ensure that the tool is switched off and the
battery pack is removed before making any adjustments or maintenance procedures.
Store the tool instruction manual and accessories in a secure place. In this way you will
always have all the parts readyQ to hand.
Remove dust and dirt regularly. Cleaning is best done with a soft brush or a rag. Wear safety glasses to protect your eyes whilst cleaning (Fig. Q).
CAUTION. Do not use cleaning agents to clean the plastic parts of the nailer. A mild detergent on a damp cloth is recommended. Water must never come into contact with the tool.
Disposing of a battery pack
Discharge your battery pack by operating your nailer, then remove the battery pack and cover the battery pack terminals with heavy duty adhesive tape to prevent a short circuit and energy discharge. Do not attempt to open
or remove any of the components of the battery pack.
13
