Global Machinery Company MX 460 Additional safety rules for hedge trimmers, Unpacking, Service

Models: MX 460 BHT500

1 10
Download 10 pages 30.12 Kb
Page 5
Image 5

Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

Service

Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional safety rules for hedge trimmers

Do not use the trimmer in the rain.

If cordset is cut or damaged remove it emmediately from the power point.

Keep hands and fingers well away from the blade.

Wear work gloves, eye protection, solid shoes and trousers when using this hedge trimmer.

Always grasp both handles when operating the unit.

Disconnect the trimmer from the mains supply when you have finished work, before cleaning or if you have been interrupted.

This trimmer has been designed to cut soft, new growth and should not be used on branches, hard wood or other forms of cutting.

Do not attempt to free a jammed blade before first switching off the machine and disconnecting it from the mains supply

If you are interrupted when operating the trimmer, complete the process and switch off before looking up.

Never allow untrained users or children to use the trimmer.

Wear goggles

Wear ear defenders

Wear a breathing mask

Unpacking

Due to modern mass production techniques, it is unlikely that your power tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

5

Page 5
Image 5
Global Machinery Company MX 460, BHT500 instruction manual Additional safety rules for hedge trimmers, Unpacking, Service