1.Keep the work area clean and tidy. Cluttered work areas and benches invite accidents and injury.

2.Consider the environment in which you are working. Do not use power tools in damp or wet locations. Keep the work area well lit. Do not expose power tools to rain. Do not use power tools in the presence of flammable liquids or gases.

3.Keep visitors away from the work area. All visitors and onlookers, especially children and infirm persons, should be kept well away from where you are working. Do not let others in the vicinity make contact with the tool or extension cord.

4.Store tools safely. When not in use, tools should be locked up out of reach.

5.Do not force the tool. The tool will do the job better and safer working at the rate for which it was designed.

6.Use the correct tool for the job. Do not force small tools or attachments to do the job best handled by a heavier duty tool. Never use a tool for a purpose for which it was not intended.

7.Dress correctly. Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves and non-slip footwear are recommended when working outdoors. If you have long hair, wear a protective hair covering.

8.Use safety accessories. Safety glasses and earmuffs should always be worn. A face or dust mask is also required if the sanding operation creates dust.

9.Do not abuse the power cord. Never pull the cord to disconnect the tool from the power point. Keep the cord away from heat, oil and sharp edges.

10.Secure the work piece. Use clamps or a vice to hold the work piece. It is safer than using your hand and frees both hands to operate the tool.

11.Do not overreach. Keep your footing secure and balanced at all times.

12.Look after your tools. Keep tools sharp and clean for

better and safer performance. Follow the instructions regarding lubrication and accessory changes. Inspect tool cords periodically and, if damaged, have them repaired by an authorised service facility. Inspect extension cords periodically and replace them if damaged. Keep tool handles dry, clean and free from oil and grease.

13.Disconnect idle tools. Switch off the power and disconnect the plug from the power point before servicing, when changing accessories and when the tool is not in use.

14.Remove adjusting keys and wrenches. Check to see that keys and adjusting wrenches are removed from the tool before switching on.

15.Avoid unintentional starting. Always check that the switch is in the OFF position before plugging in the tool to the power supply. Do not carry a plugged in tool with your finger on the switch.

16.Use outdoor rated extension cords. When a tool is used outdoors, use only extension cords that are intended for outdoor use and are so marked.

17.Stay alert. Watch what you are doing. Use common sense. Do not operate a power tool when you are tired.

18.Check for damaged parts. Before using a tool, check that there are no damaged parts. If a part is slightly damaged, carefully determine if it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, proper mounting and any other conditions that may affect the operation of the tool. A part that is damaged should be properly repaired or replaced by an authorised service facility, unless otherwise indicated in this Instruction Manual. Defective switches must be replaced by an authorised service facility. Do not use a tool if the switch does not turn the tool on and off correctly.

19.Guard against electric shock. Prevent body contact with grounded objects such as water pipes, radiators,

4

Page 3 Page 5
Page 4
Image 4
Global Machinery Company BS800 instruction manual Look after your tools. Keep tools sharp and clean for
Page 3 Page 5

BS800 specifications

Global Machinery Company BS800 is a leading machinery model renowned for its exceptional performance and innovative technologies. Designed for a wide range of industrial applications, the BS800 stands out for its versatility, reliability, and cutting-edge engineering. This machinery is primarily utilized in construction, manufacturing, and mining industries, making it a staple for companies seeking efficiency and productivity.

One of the key features of the BS800 is its powerful engine, which boasts high torque output. This engine is designed for optimal fuel efficiency, giving users the ability to operate for extended periods without frequent refueling. The robust powertrain ensures that the machine can handle heavy loads, making it ideal for demanding tasks.

The BS800 incorporates state-of-the-art automation technologies that enhance overall performance. Its advanced control system enables real-time monitoring of various operational parameters, allowing operators to make informed decisions on the fly. This feature contributes significantly to minimizing downtime and improving workflow efficiency.

Safety is another critical aspect of the BS800's design. The machine is equipped with a comprehensive suite of safety features, including emergency stop systems, load monitoring, and stability controls. These systems ensure the well-being of operators and protect the equipment from potential damage during operation.

User-friendliness is at the forefront of the BS800’s design philosophy. The intuitive interface and ergonomic controls make it accessible to operators of varying skill levels. The cab is designed for comfort, providing ample visibility and reduced operator fatigue during long work shifts.

Durability is a hallmark of the BS800, as it is constructed using high-quality materials that withstand harsh operational environments. Its weather-resistant components ensure reliable performance regardless of external conditions, whether in extreme heat or heavy rain.

In conclusion, Global Machinery Company BS800 represents the pinnacle of industrial machinery, blending innovative technologies with robust build quality. Its powerful engine, safety features, user-friendly design, and durability make it an invaluable asset for companies striving for operational excellence. The BS800 not only boosts productivity but also sets new benchmarks in the machinery industry, reinforcing Global Machinery Company's commitment to quality and innovation.
Top Page Image Contents