WARNING: Disconnect the spark

1.

Clean the cover and the area around it to

 

 

keep dirt from falling into the carburetor

plug before performing maintenance except

 

chamber when the cover is removed.

for carburetor adjustments.

2.

Remove parts as illustrated.

CHECK FOR LOOSE

NOTE: To avoid creating a fire hazard or

FASTENERS AND PARTS

producing harmful evaporative emissions, do

not clean filter in gasoline or other flammable

S

Spark Plug Boot

solvent.

S

Air Filter

3.

Wash the filter in soap and water.

S

Housing Screws

4.

Allow filter to dry.

S

Assist Handle Screws

5.

Add a few drops of oil to the filter; squeeze

S

Debris Shield

 

the filter to distribute oil.

CHECK FOR DAMAGED OR

 

6.

Replace parts.

WORN PARTS

 

 

 

 

 

Air Filter

Contact an authorized service dealer for re-

 

 

 

 

 

placement of damaged or worn parts.

 

 

 

 

 

 

 

 

 

S ON/STOP Switch -- Ensure ON/STOP

 

 

 

 

 

Screws

 

 

 

 

 

 

switch functions properly by pushing and

 

 

 

 

 

 

 

 

 

 

releasing the switch. Make sure engine

 

 

 

 

 

 

 

 

 

 

stops. Wait 5 seconds before attempting to

 

 

 

 

 

 

 

 

 

 

 

Air Filter Cover

 

restart unit to allow switch to reset. Restart

 

 

engine and continue.

REPLACE SPARK PLUG

S Fuel Tank -- Discontinue use of unit if fuel

Replace the spark plug each year to ensure

 

tank shows signs of damage or leaks.

the engine starts easier and runs better. Set

S Debris Shield -- Discontinue use of unit if

spark plug gap at 0.025 inch. Ignition timing is

 

debris shield is damaged.

fixed and nonadjustable.

INSPECT AND CLEAN UNIT AND

1.

Twist, then pull off spark plug boot.

LABELS

2.

Remove spark plug from cylinder and dis-

S After each use, inspect complete unit for

 

card.

 

loose or damaged parts. Clean the unit and

3.

Replace with Champion RCJ-6Y spark

 

labels using a damp cloth with a mild deter-

 

plug and tighten securely with a 3/4 inch

 

gent.

 

socket wrench.

S

Wipe off unit with a clean dry cloth.

4.

Reinstall the spark plug boot.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

LINE REPLACEMENT

Line in Notch

1.

Remove spool by firmly pulling on tap

 

 

 

 

button.

 

 

 

2.

Clean entire surface of hub and spool.

 

 

 

3.

Replace with pre--wound spool, or cut a

 

 

 

 

length of 20 feet of 0.080! (2 mm) diameter

 

 

 

Weed Eaterr brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert one end of the line about 1/2 inch (1 cm) into the small hole on the inside of spool.

Small

HoleSpool

Hub

Line exit hole

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

6.Push the lines into the notch, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the exit hole in the hub as shown in the illustration.

8.Align the notch with the line exit hole.

9.Push spool into hub until it snaps into place.

10.Pull the line extending outside of the hub to release the line from the notch.

7

Page 6 Page 8
Page 7
Image 7
Weed Eater 530163439 Check for Loose Fasteners and Parts, Check for Damaged or, Worn Parts, Replace Spark Plug, Labels
Page 6 Page 8

530163439 specifications

The Weed Eater 530163439 is a powerful and reliable solution for anyone looking to maintain their lawn and garden with ease. This trimmer is designed with a focus on performance and user comfort, making it an indispensable tool for homeowners and landscapers alike.

One of the standout features of the Weed Eater 530163439 is its advanced gas-powered engine. The powerful two-stroke engine delivers ample cutting power, allowing users to tackle even the toughest weeds and overgrown areas. This engine is designed for performance and durability, ensuring that it can handle regular use without compromising on power or efficiency.

In addition to its robust engine, the Weed Eater 530163439 is equipped with a long, flexible shaft that provides excellent reach and maneuverability. This design allows users to easily access hard-to-reach areas, such as beneath bushes or along fences, without straining their backs or arms. The ergonomic handle is another user-friendly feature, providing comfort and control during extended periods of operation.

This trimmer also incorporates a reliable bump feed line advance system, which simplifies the process of feeding new line when needed. With this system, users can easily release more line by tapping the trimmer head on the ground, ensuring continuous cutting without interruption. The dual-line cutting head enhances productivity, allowing for a wider cutting path and more efficient trimming.

Moreover, the Weed Eater 530163439 is built with durability in mind. Its robust construction ensures that it can withstand the rigors of outdoor use, from residential lawns to commercial landscaping projects. Additionally, the lightweight design makes it easy to carry and operate for extended periods without fatigue.

Another technological highlight of the Weed Eater 530163439 is its fuel efficiency. The engine is designed to optimize fuel consumption while maintaining powerful performance, allowing users to work longer without frequent refueling. This efficient operation reduces downtime and increases productivity, making it a smart choice for those serious about lawn care.

In conclusion, the Weed Eater 530163439 combines power, ease of use, and durability to deliver an exceptional lawn care experience. With its advanced engine, flexible shaft, and user-friendly features, this weed trimmer is ideal for anyone looking to keep their outdoor spaces neat and tidy with minimal effort.
Top Page Image Contents