CONNECTING TO HOME STEREO SYSTEMS

The Aux Out Jack is made to accept a stereo mini plug (3.5mm). By using a commercially available audio line cable (not included), simply connect the cable’s mini plug to the Aux Out Jack on your player, and the other appropriate end usually RCA JACKS to the CD/AUX INPUTS of your home stereo.

N O T E : Always switch the power off before making any connections between the player and any other set.

N O T E : The Volume Control of your player becomes inoperable whenever Aux Out Jack is used.

Adjustments are made on your audio system.

 

 

 

 

 

TO AUX

TO AUX IN JACKS

OUT JACK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YOUR CD PLAYER

 

YOUR STEREO

 

 

 

OPTIONAL CABLE

SYSTEM

 

 

 

3.5mm TO RCA JACKS

 

CLEANING THE CABINET

Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth with a weak solution of soapy water, and then wipe clean.

CLEANING THE LENS

A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work. We suggest using a special cleaning disk (not included) available in most music and Hi-Fi stores. However, if you do not have one, you may use the instructions below.

You may use a cotton swab very slightly dampened with alcohol to clean the lens (start in the middle and work you way out).

12

Page 13
Image 13
Lenoxx Electronics CD-91 operating instructions Connecting to Home Stereo Systems, Cleaning the Cabinet, Cleaning the Lens