TECHNICAL SPECIFICATIONS

CD PLAYER SECTION

Frequency response

20Hz-20kHz

Wow and flutter

Below measurable limits

Sampling frequency

44.1KHz

D/A converter

1-bit

Error correction method

CIRC

Pickup

Optical 3-beam semiconductor laser

 

(780 nm wavelength)

Laser diode material GaAIAs

 

Laser output less than 44.6mw

 

GENERAL

Maximum output (stereo headphones) .....

Power Supply

AC adaptor ............................................

DC .........................................................

Set Dimensions (approximate)

Width ................................................

Depth ...............................................

Height ..............................................

Weight (approximate) .............................

15mW + 15mW

120V/60Hz

3V: Using 2 size “AA” batteries

5"

51/2"

1 1/8"

9.5oz. (270g) (set only)

Because our products are subject to continuous improvement, Lenoxx reserves the right to modify product designs and specifications without notice and without incurring any obligation.

SPECIAL NOTE ABOUT BATTERIES

Fresh alkaline batteries will work for about 8 hours of continuous play.

If your set does not switch tracks or shuts down by itself, this means your batteries are weak and cannot supply enough current.

Either replace both batteries with fresh alkaline batteries or use the AC Adaptor (or car cord).

This set has a built-in Low Battery indicator. When this symbol “ ” flashes in your Display, both batteries need to be replaced ( the batteries may still have some life in them, but too low for use

by a CD player). The indicator “ ” (steady on) shows you that proper power is being supplied.

N O T E : You may use rechargeable batteries on this set. However, because rechargeable batteries generally have lower voltage (1.2 volts instead of 1.5 volts). Your playing time will be much less than normal fresh alkaline batteries.

16

Page 17
Image 17
Lenoxx Electronics CD-91 operating instructions CD Player Section, General, Special Note about Batteries