Global Machinery Company CBL18 instruction manual Additional safety rules for blowers, Service

Models: CBL18

1 12
Download 12 pages 57.03 Kb
Page 5
Image 5

Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

Service

Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional safety rules for blowers

Always wear adequate protective clothing when operating the tool to avoid injuries to face, eyes, hands, feet, head or hearing. Use safety glasses or a face shield, high boots or sturdy shoes, long trousers, work gloves, a hard hat and ear defenders.

Do not start the tool when it is upside down or when it is not in the operating position.

Switch the motor off and remove the battery when the tool is not being used, left unattended, being cleaned, being moved from one place to another.

Do not operate the tool near people, especially children or pets. Turn it off if they get too close. Maintain a safe distance of at least 5m from other people when using the tool.

Never direct the blower tube towards bystanders or pets. Never blow debris in the direction of bystanders or pets.

Do not handle the battery or the tool with wet hands and do not use the tool in the rain.

Keep all the air intakes and the blower tube free of dust, lint, hair and other material that may cause a reduction in air flow.

Keep a balanced and stable stance while using the tool.

Do not switch on the tool in enclosed or poorly ventilated spaces or in the presence of inflammable and/or explosive substances such as liquids, gasses and powders.

Only operate the tool during broad daylight or with adequate artificial light.

When the tool is not in use, store it in a dry place and out of reach of children.

After use, remove the battery pack and check for damage. If you have the slightest doubts, contact an authorised service centre.

Only use the tool according to the instructions given in this manual.

5

Page 5
Image 5
Global Machinery Company CBL18 instruction manual Additional safety rules for blowers, Service