Safety instructions

WARNING. Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/ or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery or capacitor operated (cordless) power tool.

Save these instructions 1. Work area

a. Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet.

Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power tool.

Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b. Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices

can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

4

Page 3 Page 5
Page 4
Image 4
Global Machinery Company FQC54V instruction manual Safety instructions
Page 3 Page 5

FQC54V specifications

Global Machinery Company has long been a leader in the heavy machinery industry, and the introduction of its latest model, the FQC54V, exemplifies this commitment to innovation and quality. Designed for versatility and efficiency, the FQC54V is aimed at addressing the diverse needs of construction, mining, and industrial applications.

One of the main features of the FQC54V is its powerful engine. Equipped with a high-performance diesel engine, it offers exceptional torque and horsepower, making it suitable for handling even the most demanding tasks. The advanced engine management system optimizes fuel consumption, providing a perfect balance between power and efficiency.

The FQC54V's advanced hydraulics system is another standout characteristic. Featuring load-sensing technology, it automatically adjusts hydraulic pressure based on the load requirements, ensuring optimal performance while minimizing energy consumption. This hydraulic system supports a wide range of attachments, further enhancing the machine's versatility on the job site.

In terms of safety, the FQC54V is designed with the operator's well-being in mind. It features an ergonomic cab equipped with state-of-the-art controls and visibility enhancements, reducing operator fatigue during long working hours. Additionally, it is outfitted with multiple safety features, including a rollover protective structure (ROPS) and advanced monitoring systems to ensure a secure working environment.

Another notable technology incorporated into the FQC54V is its telematics system. This feature allows for real-time tracking and monitoring of machine performance, providing fleet managers with valuable insights that can improve operational efficiency and reduce downtime. Predictive maintenance alerts help ensure that the machine remains in peak condition, prolonging its lifespan.

Furthermore, the FQC54V's robust build quality and durable materials make it suitable for the rigors of tough working conditions. Its reinforced chassis and heavy-duty components are designed to withstand the challenges of demanding environments, ensuring reliability and longevity.

Overall, the Global Machinery Company FQC54V represents a significant advancement in construction machinery, combining power, efficiency, and safety in a single package. Whether used in urban development, road construction, or mining operations, the FQC54V is set to become an essential tool for professionals seeking top-tier performance and reliability.
Top Page Image Contents