Global Machinery Company GLT25 Unpacking, Additional safety rules for petrol line trimmers

Models: GLT25

1 16
Download 16 pages 29.27 Kb
Page 5
Image 5
Service

Turn tool off completely before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

Service

Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool

is maintained.

sunlight, high ambient temperature and damp, wet or high humidity conditions.

Do not smoke while refuelling. This is potentially dangerous as it may ignite the fuel and cause an explosion.

Take care not to spill fuel. When refuelling the line trimmer ensure that the motor has been switched off. Prevent the spilling of fuel as this may also ignite with the hot motor. Never refuel whilst the engine running.

Be careful where you store the line trimmer. Store the line trimmer in a dry area away from flammable liquids.

Keep your distance. The line trimmer emits exhaust fumes. Ensure bystanders keep a safe distance.

Ensure you use oil-mix fuel. Ensure that you mix

40 parts unleaded fuel to 1 part 2-stroke oil. If not, the engine will overheat and cause damage to your line trimmer.

Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

Unpacking

Due to modern mass production techniques, it is unlikely that your petrol line trimmer is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

Additional safety rules for petrol line trimmers

Do not operate in a hazardous location. Such areas include where there is a risk of explosion of petrol fumes, leaking gas or explosive dust.

Do not operate in a confined area. Exhaust gases, smoke or fumes could reach dangerous concentrations.

Protect your tool. This line trimmer is NOT WEATHERPROOF and should not be exposed to direct

5

Contents of carton

Handle, upper and lower with attaching bolt and nut

Secondary handle with attaching bolt and nut

Safety guard with attaching bolt and wing nut

Spool removal spanner

Spark plug wrench

Carry strap

Instruction manual

Page 5
Image 5
Global Machinery Company GLT25 Unpacking, Additional safety rules for petrol line trimmers, Contents of carton, Service