battery indicator is showing only 1 LED (low) the battery should be removed and put on the charger.

LED Work area light

The drill has 3 LED lights (11) to illuminate the work area and improve vision when drilling in areas with insufficient light.

To turn the LED lights on and off depress the LED light switch (13).

Using the drill

Use the forward/reverse switch (4) to select the direction of rotation, then pull the trigger (3). This trigger switch is an electronic variable speed control which enables the user to vary the speed continuously. The speed varies according to how far the trigger switch is depressed, the further it is depressed the faster the chuck will rotate and the lighter it is depressed, the slower it will rotate.

To stop the drill, release the trigger switch.

Note. You can only change the direction of rotation of the drill using the forward/reverse

switch when the trigger is NOT depressed.

Forward/reverse switch

This switch (4) will allow you to change the direction of the motor while the trigger switch is not depressed.

Drilling uses the forward mode. The reverse mode is intended for the removal of screws.

Adjustable torque

This drill is equipped with 20 torque settings plus one drill setting which are controlled by the torque collar (2). By rotating the collar behind the chuck, it is possible to adjust the torque.

This will allow better control when using the drill as a

screwdriver as it prevents over-tightening of the screws.

For drilling, always use the use the Drill position by aligning the Drill symbol with the triangular indicator on the front face of the drill near the torque collar.

For setting the torque position, select a low setting on the torque collar and align the selected symbol with the triangular indicator on the top of the drill. Increase gradually to set the correct torque. It is better to use a scrap piece of material if possible to set the torque.

Inserting and removing bits

This drill has a keyless chuck, which means that a chuck key is not needed to secure a bit in the drill.

1.Open the chuck by holding the rear section of the chuck firm and rotating the front section in a anti-clockwise direction, sufficiently enough to allow the drill bit required to fully enter the jaws of the chuck.

2.Ensure the drill bit is fully inserted, so that the chuck

jaws grip the straight section of the bit.

3.Holding the rear section of the chuck firmly, rotate the front section of the chuck clock-wise until the jaws

10

Page 9 Page 11
Page 10
Image 10
Global Machinery Company GTX144100K LED Work area light, Using the drill, Forward/reverse switch, Adjustable torque
Page 9 Page 11

GTX144100K specifications

Global Machinery Company has consistently impressed the industry with its innovative lineup of machinery, and the GTX144100K stands as a testament to this legacy. Designed for versatility and performance, the GTX144100K is tailored for demanding work environments, making it an essential addition to any construction, manufacturing, or landscaping operation.

One of the main features of the GTX144100K is its robust engine, known for delivering exceptional power while maintaining fuel efficiency. The machine is equipped with a high-performance motor that offers optimal torque and horsepower, allowing it to easily tackle heavy lifting and tough workloads. This is complemented by a state-of-the-art hydraulic system that ensures smooth operation and precise control, enhancing productivity on the job site.

The GTX144100K boasts a user-friendly interface that prioritizes operator comfort and safety. The ergonomic design includes adjustable seating and intuitive controls, allowing operators of all skill levels to operate the machinery with confidence. Additionally, safety features such as automatic shut-off systems and enhanced visibility mechanisms ensure safe operation in various working conditions.

In terms of versatility, the GTX144100K is designed to accommodate a wide range of attachments, including augers, buckets, and forks. This adaptability allows operators to switch between tasks quickly, maximizing efficiency and reducing downtime. The machine's compact size also facilitates operation in tighter spaces where larger machinery may be impractical.

Furthermore, the GTX144100K incorporates advanced technology that enhances its performance and functionality. Integrated telematics provide real-time data on machine performance, enabling users to monitor fuel consumption, maintenance schedules, and operational efficiency remotely. This connectivity not only helps in reducing operating costs but also aids in preventative maintenance, extending the lifecycle of the equipment.

Durability is another hallmark of the GTX144100K. Constructed with high-strength materials and engineered to withstand harsh conditions, this machine is built for resilience. Its robust chassis and reinforced components ensure longevity, making it a wise investment for any business.

In summary, the Global Machinery Company GTX144100K stands out for its exceptional power, versatility, safety features, and advanced technology. This machine is not only designed to tackle the most demanding tasks but also prioritized operator comfort and efficiency, positioning it as a frontrunner in global machinery solutions.
Top Page Image Contents