![](/images/new-backgrounds/1328561/32856113x1.webp)
Know your product
The sander is designed for sanding wood, metal, plastic and similar materials. It is a finishing sander and should be used only when giving a surface a final sanding. As the base is reasonably small, the sander is suited for accessing tight corners that larger sanders are unable to reach.
1.On/Off switch
2.
3.Platen
4.Dust extraction port
2
1
Unpacking
Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.
Assembly
The GMC KAT150A Sand Kat Detail Sander is packed, fully assembled, ready for use. You need only to add the appropriate sanding sheet.
4
3
7