General safety instructions

WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in fire and/or serious injury.

Save these instructions 1) Work area

a)Keep work area clean and well lit. Cluttered and dark areas invite accidents.

b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) Personal safety

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c)Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

d)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

e)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

f)If devices are provided for the connection of dust extraction and collection facilities ensure that these are connected and properly used. Use of these devices can reduce dust-related hazards.

3) Power tool use and care

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Turn tool off completely before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits etc., In accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

5

Page 4 Page 6
Page 5
Image 5
Global Machinery Company PCH25 instruction manual General safety instructions
Page 4 Page 6

PCH25 specifications

Global Machinery Company PCH25 is a leading player in the construction and heavy machinery sector, renowned for its robust and versatile equipment. The PCH25 model encapsulates the company's commitment to innovation, efficiency, and reliability, making it a preferred choice for contractors and builders worldwide.

One of the standout features of the PCH25 is its powerful engine, which provides exceptional horsepower and torque, enabling it to handle demanding tasks in various terrains. This model is equipped with an advanced hydraulic system that allows for smooth operation and precise control, enhancing productivity on the job site. The hydraulic system is complemented by a quick-attach interface, which facilitates rapid changeover between attachments, thereby maximizing versatility and minimizing downtime.

The PCH25 integrates cutting-edge technology to improve performance and efficiency. Its onboard diagnostic system offers real-time data on machine health, allowing operators to monitor key performance indicators and schedule maintenance proactively. This feature not only extends the lifespan of the machinery but also reduces operational costs by preventing unexpected breakdowns.

Another notable characteristic of the PCH25 is its ergonomic design. The operator's cabin is spacious and fitted with user-friendly controls, ensuring comfort during long working hours. Additionally, the cabin is designed to provide excellent visibility, which enhances safety on the job site by allowing operators to maintain awareness of their surroundings.

The PCH25 also adheres to strict environmental standards, making it a sustainable option for construction projects. Its fuel-efficient engine reduces emissions and decreases the carbon footprint, aligning with the industry's growing focus on eco-friendly practices.

Durability is a hallmark of the PCH25, with its robust construction designed to withstand the rigors of daily use in harsh conditions. The model is built with high-quality materials that resist wear and tear, ensuring long-term reliability and reduced maintenance needs.

In summary, the Global Machinery Company PCH25 is a state-of-the-art machine that combines power, efficiency, and user-centric design. Its advanced technologies, ergonomic features, and environmental sustainability make it a solid investment for construction professionals seeking to enhance their operational capabilities. With the PCH25, users can expect unmatched performance and reliability, driving their projects to successful completion.
Top Page Image Contents