Checking the oil

Caution. The lawn mower is shipped without oil. Do not start your lawn mower before ensuring it has been filled with the right amount of correct grade oil. Refer to the oil recommendations section of the Briggs & Stratton instruction manual for this information.

1. Move the lawn mower to

 

1

a level surface and clean

around the oil filter cap (8).

 

2.Remove the oil filter cap with dipstick and wipe it with a clean cloth. Replace it and retighten the cap.

3.Remove the dipstick again and check the oil level, the

oil should be at the full

3

mark.

 

4.If oil is required add it slowly (the oil capacity is about 0.6 litre), do not over fill.

5.Retighten the oil filter cap firmly before starting the engine.

Starting the engine

Note. Before starting the mower check the oil and fuel levels.

2.Push the primer bulb firmly 5 times (for initial starting) or 3 times (for engine starting there after).

2

 

3

 

 

 

3.Pull the recoil starter (9) lightly until you feel resistance then pull quickly until the engine starts. Do not pull the cord with a jerk or release it until fully rewound.

4.Once the lawn mower has started and warmed up move the throttle lever to the Run position.

Stopping the engine

To stop the engine, move the throttle lever (3) to the stop position.

Cold Start

Run

Hot

Start

StopStop

1. Move the throttle lever (3) to the cold start position.

Mowing advice

Position

1

Cold Start

 

Cold Start

 

 

 

 

 

 

Run

 

 

Hot

Start

Stop

1.It is recommended to use the fast throttle setting and keep the engine running at maximum speed. This will deliver the best cut. If the speed of the engine slows this could indicate the mower is being overloaded, by trying to cut to much grass. Try mowing a narrower strip, mowing slower or raise the cutting height.

2.Sharp blades cut cleanly and efficiently, if the blade is dull it will tear the grass. This will result in the ends turning brown. When the blades no longer cut cleanly either sharpen them or replace them.

9

Page 8 Page 10
Page 9
Image 9
Global Machinery Company RL 500 Checking the oil, Starting the engine, Stopping the engine, Mowing advice
Page 8 Page 10

RL 500 specifications

The Global Machinery Company RL 500 is a cutting-edge industrial machine designed to meet the rigorous demands of today’s fast-paced manufacturing environment. Engineered for versatility, efficiency, and precision, the RL 500 has become a benchmark in the industry since its introduction.

One of the standout features of the RL 500 is its robust build quality. Constructed from high-grade materials, this machine is designed to withstand heavy use and the rigors of a demanding production line. Its durable exterior not only enhances its longevity but also ensures that it maintains high performance standards over time.

The RL 500 is powered by an advanced, energy-efficient motor that provides exceptional torque and speed. This motor technology significantly reduces operational costs while delivering increased power output, allowing for faster cycle times and improved productivity. The machine can effortlessly handle a variety of tasks, from precision machining to heavy-duty cutting applications.

Incorporating the latest advancements in automation, the RL 500 comes with a state-of-the-art programmable logic controller (PLC) that streamlines operations. This technology enables users to easily customize machine settings for varying production requirements, facilitating quick changeovers and minimizing downtime. The intuitive user interface simplifies operation, making it accessible even for less experienced personnel.

The RL 500 also features advanced safety mechanisms, including emergency stop functions and protective coverings. These safety measures ensure that operators can work with peace of mind, knowing that the machinery is equipped to handle potential hazards.

Moreover, the RL 500 is compatible with Industry 4.0 practices, offering IoT connectivity for real-time monitoring and data analytics. This feature allows manufacturers to track performance metrics and detect issues before they escalate, leading to proactive maintenance and optimized production workflows.

Another notable characteristic is the machine's adaptability to various materials. Whether it be metals, plastics, or composites, the RL 500 provides versatile performance across a range of industries, from aerospace to automotive and beyond.

In conclusion, the Global Machinery Company RL 500 epitomizes modern industrial engineering. With its robust design, energy efficiency, advanced automation, and adaptability, it represents a significant advancement in manufacturing technology, enabling businesses to enhance productivity, ensure safety, and remain competitive in a global market. The RL 500 is more than just a machine; it is a valuable partner in achieving operational excellence.
Top Page Image Contents