3.With the engine switched off, lift the front of the mower upwards so the handle bar sits on the ground and the spark plug faces upwards.
Note. Improper tipping may affect engine performance.
4.Put on a pair of sturdy gloves to protect your hands.
5.Block the rotation of the blade and use a spanner (not supplied) to unscrew the blade bolt in an
6.Replace the blade and screw in the blade bolt, tightening
it with a spanner (not supplied).
Note. When reassembling the blade, ensure the cutting edges face in the direction of the engine rotation.
7.Return the mower to the upright position.
8.Start the engine and allow the mower to run for a few minutes to check that the blade is properly fitted and that there is no undue noise or vibration. Use only the blade as recommended by the manufacturer.
For all engine maintenance information refer to the Briggs & Stratton instruction manual.
12
