Checking the oil

CAUTION. The lawn mower is shipped without oil. Do not start your lawn mower before ensuring it has been filled with the right amount of correct grade oil. Refer to the oil recommendations section of the Briggs & Stratton instruction manual for this information.

1.Move the lawn mower to a level surface and clean around the oil filter cap (8) .

2.Remove the oil filter cap with dipstick and wipe it with a clean cloth. Replace it and retighten the cap.

3.Remove the dipstick again and check the oil level, the oil should be at the full mark.

4.If oil is required add it slowly (the oil capacity is about 0.6 litre), do not over fill.

5.Retighten the oil filter cap firmly before starting the engine.

Starting the engine

Note. Before starting the mower check the oil and fuel levels.

Note. Ensure that the spark plug RJ19LM is fitted before starting the mower.

1. Move the throttle lever (3) to the cold start position.

Cold

 

Start

Cold Start

 

 

Run

 

 

Hot

Start

2.Push the primer bulb firmly 5 times (for initial starting) or 3 times (for engine starting thereafter).

3.Disengage the brake by pulling the brake lever (14) toward the handle. Letting go of the lever will prevent the mower from starting or will stop the engine, if running.

4.While holding the brake lever inward pull the recoil starter

(9)lightly until you feel resistance then pull quickly until the engine starts. Do not pull the cord with a jerk or release it until fully rewound.

5.Once the lawn mower has started and warmed up move the throttle lever to the Run position while continuing to hold the brake lever.

Stopping the engine

To stop the engine reduce

Cold Start

the speed of the engine by

Run

pulling the throttle lever (3)

 

towards the tortoise and

 

release the brake lever

 

(14). In an emergency just

Start

 

Hot

release the brake lever.

 

Mowing advice

1.It is recommended to use the fast throttle setting and keep the engine running at maximum speed. This will deliver the best cut and increase engine life. If the speed of the engine slows this could indicate the mower is being overloaded, by trying to cut to much grass. Try mowing a narrower strip, mowing slower or raise the cutting height.

2.Before you begin mowing always check and clear the grassed area for all foreign objects. Especially solid ones that can be semi concealed in the ground such as rocks, stumps and garden stakes.

10

Page 9 Page 11
Page 10
Image 10
Global Machinery Company RLMC instruction manual Checking the oil, Starting the engine, Stopping the engine, Mowing advice
Page 9 Page 11

RLMC specifications

Global Machinery Company RLMC stands as a prominent player in the manufacturing sector, recognized for its advanced technological innovations and a broad range of machinery solutions. Established with the vision of delivering superior industrial equipment, RLMC has garnered a reputation for quality, reliability, and performance. Their extensive product portfolio includes machinery for construction, agriculture, and manufacturing, catering to a diverse clientele across various industries.

One of the main features of RLMC is its commitment to integrating cutting-edge technology into their machinery. The company leverages automation and smart technology to enhance productivity and efficiency. This includes the incorporation of IoT (Internet of Things) devices, which allow real-time monitoring and data analysis of machinery performance. Customers benefit from reduced downtime and improved operational insights, making informed decisions to optimize their workflows.

RLMC places a strong emphasis on sustainability and environmentally friendly practices. Their manufacturing processes are designed to minimize waste and energy consumption. Many of their machines are equipped with eco-friendly technology, contributing to lower emissions and compliance with global environmental standards. This focus on sustainability not only aligns with global efforts to reduce environmental impact but also resonates with an increasingly eco-conscious consumer base.

Another hallmark of RLMC is their commitment to research and development. The company invests significantly in R&D to stay ahead of industry trends and technological advancements. This allows RLMC to introduce innovative products that meet the evolving needs of their customers. Whether it's developing more efficient engines or creating machinery that requires less maintenance, the company’s proactive approach ensures they remain at the forefront of the industry.

Customer service and support are also critical aspects of RLMC's business model. The company offers comprehensive after-sales services, including maintenance, training, and parts supply. This commitment to customer satisfaction helps build long-term relationships and ensures that clients can rely on their machinery for years to come.

In conclusion, Global Machinery Company RLMC is characterized by its technological prowess, commitment to sustainability, rigorous research and development, and exemplary customer service. With a focus on delivering high-quality, efficient machinery, RLMC continues to shape the future of the manufacturing industry across the globe.
Top Page Image Contents