•Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
•Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
•Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
•Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
•Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.
Service
•Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Additional safety rules for blower vacs
•Always wear adequate protective clothing when operating the tool to avoid injuries to face, eyes, hands, feet, head or hearing. Use safety glasses or a face shield, high boots or sturdy shoes, long trousers, work gloves, a hard hat and ear defenders.
•Do not start the tool when it is upside down or when it is not in the operating position.
•Switch the motor off and remove the plug when the tool is not being used, left unattended, being cleaned, being moved from one place to another or when the extension cord is entangled or damaged.
•Do not operate the tool near people, especially children or pets. Turn it off if they get too close. Maintain a safe distance of at least 5m from other people when using the tool.
•Never direct the blower tube or blow debris towards bystanders or pets.
•The operator is responsible for accidents or hazards occuring to other people or their property.
•Do not handle the plug or the tool with wet hands and do not use the tool in the rain.
•Use only outdoor rated extension leads that are so marked. Keep the extension cord away from heat, oil and sharp edges.
•Ensure that the extension lead is secured in a manner that prevents it form disconnecting from the plug whilst in use.
•Keep all the air intakes and the blower tube free of dust, lint, hair and other material that may cause a reduction in air flow.
•Keep a balanced and stable stance while using the tool.
5
