Globalsat Technology BTA-830 user manual BTH-820button function, LED indicator function, Button

BTH-820, BTA-830 user manual					page 6
	BTH-820 button function
	Button	Incoming call is	While on the phone	While playing the music	While playing the
		ringing		with Bluetooth Dongle	music with BTA-830
				(AVRCP, A2DP profile).	(A2DP profile)
		Answer	Transfer to cell phone	Play / Pause	Play / Mute
		Refuse the call	Hang up	Stop	Mute

	Answer	Volume up		Volume up	Volume up
	Answer	Volume down		Volume down	Volume down
	Answer	N/A		Next	N/A
	Answer	N/A		Previous	N/A
	Lock the buttons	Lock the buttons		Lock the buttons	Lock the buttons
Remark 1	--	To avoid the noise		Remote control	--
		interference, please		(AVRCP) is supported
		put the microphone		under “Microsoft
		within 30 cm from your		Window Media Player”.
		mouth while talking.
Remark 2	When disconnected, you can connect to the previous paired cell phone by pressing the play key
	on BTH-820. You can disconnect them by pressing and holding the stop key for 2 seconds.
	If BTH-820 is connected only with a cell phone, you can perform the redial function by pressing
	and holding	or	for 2 seconds. You can initiate voice dialing by pressing and holding
	the play key for 2 seconds.

LED indicator function

Status	BTH-820
Standby	Blue LED flash once
Connecting	Blue LED flash twice
Transferring	Blue LED flash four times
Pairing	Blue and red LED flash quickly by turns
Low battery	Red LED is on

BTA-830

Green(or Blue) LED flash once

Green(or Blue) LED flash twice

Green(or Blue) LED flash four times

Green(or Blue) and red LED flash quickly by turns Red LED is on