Globe SP8 instruction manual Installation, Unpacking, Proper Grounding

Models: SP8

1 14
Download 14 pages 34.48 Kb
Page 5
Image 5

Installation

UNPACKING

Unpack the mixer immediately after receipt. If the machine is found to be damaged, save the packaging material and contact the carrier within fifteen (15) days of delivery. Immediately contact your source of the equipment.

You have no recourse to damage after fifteen (15) days.

TO AVOID SERIOUS PERSONAL INJURY:

ALWAYS install equipment in work area with adequate light and space.

ONLY operate on a solid, level, nonskid surface that is nonflammable.

NEVER bypass, alter, or modify this equipment in any way from its original condition. Doing so my create hazards and will void warranty.

NEVER operate the mixer without all warnings attached to it.

INSTALLATION

1.Read this manual thoroughly before installation and operation. DO NOT proceed with installation and operation if you have any questions or do not understand anything in this manual. Contact your local representative or Globe first.

2.Remove the mixer from the box.

3.Select a location for the mixer that has a level, solid, nonskid surface that is nonflammable and is in a well-lighted work area away from children and visitors.

4.Inspect the mixer to ensure all parts have been provided (i.e., bowl, beater, whip, and hook).

PROPER GROUNDING

THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE OUTLET TO WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD GROUND PRONG FROM THE POWER CORD OR USE ANY ADAPTER PLUG (Fig. 6-1 and Fig. 6-2).

Fig. 6-1 Correct

Fig. 6-2 Incorrect

5.Complete the warranty card and mail it to Globe or register online at www.globeslicers.com/warranty.asp.

6.Clean the mixer prior to using it. Follow the cleaning instructions on page 10. NOTE: It is normal for the factory to apply a generous amount of grease in and on the machine before initial use. Excess high pressured grease (brownish-black) may also be found on the planetary shaft and some drippings may be found in the bowl.

Page 6

Page 5
Image 5
Globe SP8 instruction manual Installation, Unpacking, Proper Grounding, You have no recourse to damage after fifteen 15 days