GN Netcom BT250v Basic Operations, Pair to your Bluetooth phone, Turning headset on/off

4“Pair” to your Bluetooth phone

English	Pairing3 will create a unique and encrypted wireless link between
	two Bluetooth enabled devices such as your Bluetooth phone and Jabra BT250v.
	1.	Ensure the headset is off (see Turning
		headset on/off section).
	2.	Press and hold until you see a solid
		blue light (approximately 8 seconds), then
		release* (see Fig. 2).
	3.	Set your Bluetooth phone to “discover”
		the headset by following your phone’s	Fig. 2
		instruction guide. Typically, the steps
		involve going to a “setup”, “connect”, or
		“Bluetooth” menu on your phone and
		then selecting the option to “discover” a
		Bluetooth device.
	4.	Your phone will find the “Jabra BT250v”
		headset and ask if you want to pair with it.	Fig. 3
		Confirm this by pressing “yes” or “ok”.
	5.	Enter passkey or PIN4 = 0000 (4 zeros), then press “yes” or “ok”.

IMPORTANT: If pairing was successful, the blue indicator light will briefly flash rapidly before going back to flashing every 3 seconds. If unsuccessful, the light remains solid, and you’ll need to reattempt pairing (see steps 3–5 above).

* If you have a Bluetooth phone that supports the hands-freeBluetooth profile, see Enhanced features section for alternative pairing instructions. Phone- specific pairing instructions can be found online at www.jabra.com/fscs

5Turning on/off call alert vibrate

The Jabra 250v has a unique call alert feature that vibrates to inform you that you are receiving a call. The vibrate function is enabled when you first turn on the Jabra 250v. If you turn on the headset in the usual way without touching the volume button, the vibrate function will remain enabled.

1.To turn off the vibrate feature, hold the volume-down button while you turn the headset on.

2.If you wish to re-activate the vibrate feature, hold the volume-up button while you turn the headset on.

BASIC OPERATIONS

6Turning headset on/off

	What you do		What you hear	What you see
Turning	Press and hold	for 3 to	Ascending	The blue indicator
headset on	5 seconds until you see a		(low-to-high)	light will flash while
	burst of flashes on the blue		tones	the power is on (see
	indicator light, then release			Status indicators
				table below)
Turning	Press and hold	for 3 to	Descending	The blue indicator
headset off	5 seconds until you see a		(high-to-low)	light will stop
	burst of flashes on the blue		tones	flashing
	indicator light, then release

Status indicators

What you see	What you hear	Status
Flashes every	Quick series of 2 tones	Active Mode5
second	– low to high pitch (when	•	Call in progress
	active mode starts)	•	Up to 7 hours of talk-time*
Flashes every	Quick series of 2 tones	Standby Mode6
3 seconds	– high to low pitch (when	•	Waiting for call
	standby mode starts)	•	Up to 200 hours of
			standby time*
3 flashes every	3 beeps every 30 seconds	Low Battery (in active mode)
second		•	3 – 5 minutes of talk time left
3 flashes every	3 beeps every 5 minutes	Low Battery (in standby mode)
3 seconds		•	3 – 5 minutes of talk time left

*Depending on phone type and usage.

English

6 7