GN Netcom BT250v user manual Frequently asked questions, Need more help?, Storage of headset

Once you’re done pairing, the following new headset features will be available:

	•	Last number redial (when not on a call)	until you hear 2 short beeps,
English		While the headset is on, press and hold
		release immediately
	•	Rejecting an incoming call (when not on a call)
		When your phone rings, press and hold	until you hear 2 short beeps,
		release immediately
	•	Call-waiting(swapping between 2 calls)

When your phone notifies you of another incoming call while you’re on a call, press and hold until you hear 2 short beeps, release immediately

•Putting a call on hold

While you’re on a call, press and hold until you hear 2 short beeps, release immediately. Repeat to retrieve the call

15Frequently asked questions

1.How far away from my phone will my Jabra BT250v work? The operating range is typically up to 33 feet (10 metres).

2.Will Jabra BT250v work with my cordless phone at home? Jabra BT250v is not designed for use with cordless phones.

3.Will Jabra BT250v work with laptops, PCs, and PDAs?

Jabra BT250v will work with devices that are compliant with Bluetooth version 1.1 or higher specifications and support the headset and/or hands-free profile(s).

4.Will anything cause interference with my conversation when I’m using my Jabra BT250v?

Appliances such as cordless phones and wireless networking equipment may cause interference with your conversation, usually adding a crackling noise. To reduce any interference, keep the headset away from other devices that use or produce radio waves.

12

5. Will my Jabra BT250v interfere with my car’s electronics, radio,
or computer?
Jabra BT250v produces significantly less power than a typical mobile phone. It also
only emits signals that are in compliance with the international Bluetooth standard.	English
Therefore, you should not expect any interference with standard consumer-grade
electronics equipment.
6. Can other Bluetooth phone users hear my conversation?
When you pair your headset to your Bluetooth phone, you are creating a private
link between only these two Bluetooth devices. The wireless Bluetooth technology
used in your headset is not easily monitored by third parties because Bluetooth
wireless signals are significantly lower in radio frequency power than those
produced by a typical mobile phone.
7. What material is the headset made of?
The MiniGel is made of PVC (polyvinyl chloride), a form of plastic. The headset itself
is primarily made of thermoplastic polyurethane, which is a soft plastic. The face
of the headset, where the buttons are located, is made of polycarbonate, a very
strong, hard plastic. Neither the MiniGel nor the headset contains latex.
8. How do I take care of Jabra BT250v?
• To clean the headset, use a clean, soft cloth that is slightly damp
• To clean the MiniGel, remove it from the headset by gently lifting and pulling it
off the speaker housing. Then, wash it in warm, soapy water

16Need more help?

1.Web: www.jabra.com/fscs (for the latest support info and online User Manuals).

2.E-mail and telephone support: See back inside cover for customer service support telephone numbers and e-mail.

17Storage of headset

1. Always store the Jabra BT250v with power off and safely protected.

2. Avoid storage at high temperatures (above 60°C / 134°F) – such as in a hot vehicle or in direct sunlight. (Storage at high temperatures can degrade performance and reduce battery life).

3. Do not expose the headset or any of its supplied parts to rain or other liquids.

13