GN Netcom STRATUS ULTRA-G manual Microphone Positioning, Figure Figure Clothing Clip

Microphone Positioning

To take advantage of the noise canceling qualities of the microphone, position the Stratus Ultra-G headset with the flat side of the microphone, marked with an F, facing you. The microphone boom should be adjusted so that the microphone is approximately one finger width away from your lower lip (see Figure 11).

The Stratus Ultra-G has a flexible boom that can be reshaped until the microphone is correctly positioned in front of your mouth. One hand should grasp and steady the receiver end of the boom. The other hand can then flex the boom (see Figure 12).

CAUTION: Never forcefully rotate the microphone boom past its stop point in the receiver assembly!

Clothing Clip

The clothing clip should be fastened for comfortable wearing (see Figure 13). It is designed to prevent the weight of the cord from dislodging the headset. Position the clip conveniently on your clothing. To reduce excess slack, reposition the clip by sliding it up and down the cord.

1Finger Width

Figure 11 Microphone Positioning

Figure 12

Figure 13

Clothing Clip

6