DVD Operation

Playing DVDs

Playback Setup DVD

Turn on the TV and select the video input source con- nected to the DVD+VCR.

Audio system: Turn on the audio system and select the input source connected to the DVD+VCR.

Set the Output Source to DVD as shown in “Selecting the Viewing Source” on page 6.

1 Press OPEN/CLOSE (Z) to open the disc tray.

2 Load your chosen disc in the tray, with the label facing up.

When a double-sided DVD is inserted, make sure the side you want to play is facing down.

3 Press OPEN/CLOSE (Z) to close the tray. Playback starts automatically. If playback does not start, press N (PLAY).

In some cases, the disc menu might appear instead.

If a menu screen is displayed

The menu screen may be displayed first after loading a DVD which contains a menu.

DVD

Use b/B/v/V buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or DISC MENU to return to the menu screen.

otes

If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit password must be entered and/or the disc must be authorized (see Parental Control, on page 20).

DVDs may have a Region Code.

Your DVD+VCR will not play discs that have a Region Code different from your DVD+VCR. The Region Code for this DVD+VCR is 1 (one).

Do not keep a fixed image displayed on the screen for a long time.

Screen Saver

The screen saver picture appears if you leave the DVD+VCR in Stop mode for about five minutes.

Last Scene Memory

This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the player. if you load a disc that has the scene memo- rized,m the scene is automatically recalled.

ote

This player does not memorize the scene of a disc if you switch off the player before commencing to play the disc.

General Features

ote

Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.

Selecting other TITLEs

DVD

1 /3

When a disc has more than one title, you can select another title as follows:

Press DISPLAY, then press the appropriate number buttons (0-9) to select a title number.

Selecting other CHAPTERs

DVD

 

1 /12

 

 

When a title on a disc has more than one chapter or a disc has more than one track, you can select another chapter as follows:

Press SKIP . or > briefly during playback to return to the beginning of the

current chapter or to select the next chapter.

Press SKIP . twice briefly to step back to the pre- vious chapter.

To go directly to any chapter during playback, press DISPLAY. Use v/V to select Chapter icon. Then, enter the chapter number with the number buttons (0-9).

ote

For two-digit numbers, press the numbered buttons (0-9) in rapid succession.

Slow Motion DVD

1Press PAUSE/STEP (X) during playback. The DVD+VCR will now go into PAUSE mode.

2Press BACKWARD (m) or FORWARD (M) during pause mode.

The DVD+VCR will enter SLOW mode.

3Use BACKWARD (m) or FORWARD (M) to select the required speed: t 1/16, t 1/8, t 1/4, t 1/2 (backward), or T 1/16, T 1/8, T 1/4, T 1/2 (for- ward).

4To return to playback, press N (PLAY).

OPERATION

27

Page 27
Image 27
Goldstar GBV441 owner manual DVD Operation Playing DVDs, General Features