OPERATION
29
DVD Operation (Continued)General Features (Continued)

Marker Search

You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1During disc playback, press MARKER when playback
reaches the spot that you want to memorize.
The Marker icon will appear on the TV screen briefly.
2Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
1During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2Within 10 seconds, use 1/2or number button to
select a Marker number that you want to recall.
3Press ENTER.
Playback will start from the Marked scene.
4To remove the MARKER SEARCH menu, press
SEARCH.
To Clear a Marked Scene
1During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2Within 10 seconds, use 1/2or number button to
select a Marker number that you want to erase.
3Press CLEAR.
The Marker number will be erased from the list.
4Repeat steps 2 and 3 to erase additional Marker
numbers.
5To remove the MARKER SEARCH menu, press
SEARCH.
All markers are erased when the disc is ejected.

Changing Video Mode

With certain discs, the playback picture may be flick-
ering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To change the video mode, press and hold
DISPLAYabout 3 seconds during disc playback. The
new video mode number selected is displayed on the
TV screen. Check whether the video quality has
improved. If not, repeat the above procedure until pic-
ture quality is improved.
Video mode sequence:
MODE1 →MODE2 →MODE3 →MODE1
If you turn off the power, the video mode will return to
initial default state (MODE1).

Detailed Description of each Video Mode

MODE1 : The source material of the DVD video (film material
or video material) is determined from disc information.
MODE2 :Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3 :Suitable for playing video based content with
comparatively little motion.
ote
The video mode setting only works when the
Progressive Scan option is set to “On” in the Setup
menu.
Special DVD Features

Checking the contents of DVD Video

discs: Menus

DVDs may contain menus that allow you to access spe-
cial features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select an
option. Or, use b/B/v/Vbuttons to highlight your selec-
tion, then press ENTER.

Title Menu

1Press TITLE.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3To remove the title menu, press TITLE again.

Disc Menu

1Press DISC MENU.
The disc menu is displayed.
2To remove the disc menu, press DISC MENU again.

Camera Angle

If the disc contains sequences recorded from different
camera angles, the angle icon blinks on the TV screen.
You can then change the camera angle if you wish.
Press ANGLE repeatedly during playback to select a
desired angle.
The number of the current angle appears on the display.

Changing the Audio Language

Press AUDIO repeatedly during playback to hear a
different audio language or audio track.

Subtitles

Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
ote
If appears, the feature at that moment or with that
specific DVD.
1 ENG
ABC
DVD
1 ENG
D
5.1 CH
DVD
1 /1
DVD
DVD
DVD
DVD
MARKER SEARCH
1/9
DVD