Operating Instructions
_CAUTION: The Remote Controller will not function properly if strong
light strikes the sensor window of the air conditioner or if there are
obstacles between the Remote Controller and the air conditioner.
Power
Toturn the Set ON, push the button. Toturn the Set OFF, push the button again.
This button takes priority over anyother buttons.
When you firstturn iton, the Set is onthe High cool mode and the temp. at 72°F
Temperature Setting
This button controls the room temperature setting in a range between
60C'Fand 86°F in 1 increments.
FanSpeed
Pressingthe Fan Speed buttontoggles between Low and
High speeds,
On/Off Timer
- Stopping Operation |
Each pressof the button cycles through the options inthis order: L
1 Hour42 Hours-3 Hours-4 Hours-5 Hours--6 Hours-7 Hours
48 Hours-9 Hours-lO Hours-11 Hours-12 Hours-CANCLE.
Theset temperature will be raised by 2"F after 30 minutes and again
afteranother 30 minutes.
- Starting Operation
Each pressof the button cycles through the options inthis order:
1 Hour_2 Hours-3 Hours-4 Hours-5 Hours-6 Hours-7 Hours
48 Hours-9 Hours-lO Hours-11 Hours-12 Hours-CANCLE.
Cool/Energy 8averlFanlDry
Everytime you push this button, it will toggle between COOL,
ENERGY SAVER, FAN, and DRY.
Fan Speed
Timer Mode
4 ......
Energy Saver
The fanstops when the compressor stops cooling.
Approximately every 3 minutes the fanwill turn onand
check the room air to determine if cooling isneeded.
How to Insert Batteries
1.Remove the cover from the back of the remote
controller
2.Insert two batteries.
Be sure of the polarity when installing the
batteries.
Be sure that both batteries are new.
3. Re-attach the cover.
@
®®Donot userechargeable
batteries. Such batteries
differ from standard drycells
in shape, dimensions, and
performance.
Remove the batteries from
the remote controller if the air
conditioner is notgoing to be
used for an extended length
of time.
18 Room Air Conditioner