Getting started

04

1 Install batteries in remote

Remove the battery cover to reveal the battery compartment.

Align the two size AAA batteries so that the ‘+’ and ‘-’ marks on the batteries match the ‘+’ and ‘-’ marks inside the battery compartment.

Push the first battery fully into the slot and then place the second battery in the slot. The two batteries are in line.

Replace the battery cover.

2Plug in and switch on

Insert the Digital Box mains plug into a mains socket. The power indicator visible behind the front panel will light up red (standby) or green (on).

Switch your TV on and if necessary press the ‘STANDBY’ button on the remote control until the light on the Digital Box front panel lights up green.

3The Easy install screen

The first time installation will appear on screen. Select the aspect ratio (screen size), using the } buttons to move between the options: NORMAL and WIDESCREEN.

Press the OK button to start the installation. The Digital Box will automatically begin to tune.

First Time Installation

Select Your TV Screen type using the arrow buttons

NORMAL

Press OK to start Tuning Scan

7