Quick Start
Battery Pack Overview
1 2 3
4
1DC In Jack
2Battery Release Button
3 Battery Charge Indicator
4Battery Connectors
Charging the Battery Pack While it is Attached to the Player
1Connect the battery pack to the back of the player as shown.
2Plug the supplied AC adapter into a standard power outlet, and then connect it to the DC In jack on the right side of the player.
Charging the Battery Pack
Before using the battery pack, make sure it is fully charged. You can charge the battery pack directly or while it is attached to the portable DVD player.
Charging the Battery Pack Directly
1Plug the supplied AC adapter into a standard power outlet, and then connect it to the DC IN jack on the left side of the battery pack.
•You can also use the supplied cigarette lighter adapter in place of the AC adapter to charge the battery.
DC In Jack
2The battery charge indicator will turn red while the battery is charging.
3The battery charge indicator will turn green when the battery pack is fully charged.
•Allow ~3 hours to fully charge the battery.
•A fully charged battery permits ~3 hours of playback time.
3Turn off the player. The battery pack will NOT charge while the portable DVD player is powered on.
4The battery charge indicator will turn red while the battery is charging.
5The battery charge indicator will turn green when the battery pack is fully charged.
Removing the Battery Pack
•Press the Battery Release button on top of the battery pack to remove it.
CAUTION
• Use the specifi ed battery pack only.
•May explode if battery pack is incorrectly replaced or disposed of in fi re. Replace only with the same or equivalent type.
•Do not short circuit.
•Do not place the battery pack in direct sunlight or in excessively hot places (over 140°F (60°C) such as the dashboard of cars.
•Use only with the specifi ed power adapter (12VDC, 1.25A).
9
