GoVideo DVR 4250, DVR 4200 manual VCR Setup VCR Setup Menu, Channel Selection, Preparation

The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.

After the AUTO CHANNEL SEARCH is complete,

5 make sure the CHANNEL SOURCE is set appro- priately (TV or CATV) by pressing 3 or 4 and choosing the correct CHANNEL SOURCE (TV or CATV) by pressing 1 or 2 using the CHANNEL

SETUP menu.

Remember, TV is for off the air antenna reception, CATV is for cable TV connection.

6 Press SETUP/MENU to return to the TV screen.

Use CH/TRACK (▲/▼) or CHANNEL (▲/▼) on the

7 front panel to cycle the VCR through the chan- nels in memory.

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from memory manually.

1 Press 4 to choose the ADD/DEL CH item on the CHANNEL SETUP menu. Press 1 or 2 to select a channel to add or erase.

2 Press ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels.

3 Press SETUP/MENU to return to the TV screen.

VCR Setup (Continued)

The VCR Setup Menu

1 Press VCR, then press SETUP/MENU to display the MAIN menu.

2 Press 3 or 4 to select the VCR SETUP menu, then press ENTER.

The VCR SETUP menu will appear.

SET CLOCK
TIMER RECORD		SCREEN DISPLAY:	ON
		LANGUAGE:
CHANNEL SETUP		AUDIO MODE:
		BROADCAST TYPE:
VCR SETUP		AUDIO OUTPUT:
SELECT	ENTER	SELECT	ADJUST
TO EXIT PRESS		TO EXIT PRESS

3VCR SETUP menu. Then press 1 or 2 to choose a desired setting.Press 3 or 4 to choose a desired item on the

SCREEN DISPLAY

The on-screen display of this VCR can be turned on or off. The SCREEN DISPLAY is switched between ON and OFF by pressing 1 or 2.

LANGUAGE

The on-screen programming of this VCR can display in either English, Spanish, or French.

The LANGUAGE is switched among ENGLISH, SPANISH and FRENCH by pressing 1 or 2.

AUDIO MODE

The VCR has two separate audio playback systems, the high quality VHS Hi-Fi system and standard NORMAL mono sys- tem. The same audio is generally recorded on both systems.

The VHS Hi-Fi system plays on separate (left and right) chan- nels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a VCR that does not have VHS Hi-Fi.

The AUDIO MODE is switched between HI-FI and NORMAL by pressing 1 or 2.

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO position. The VCR will then record a STEREO program when available, and record a mono program IF the program is NOT IN STEREO. For weak STEREO and/or SAP broadcasting, changing the display to mono may give clearer sound.

The BROADCAST TYPE is switched among STEREO, SAP, and MONO by pressing 1 or 2.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/ NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and stereo.

This display setting should normally be in the stereo position, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.

The AUDIO OUTPUT is switched among STEREO, LEFT, and RIGHT by pressing 1 or 2.

Channel Selection

This VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125.

Preparation:

Connect the VCR to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 12.

AUTO CHANNEL PROGRAMMING

1 Press SETUP/MENU and the MAIN menu will appear.

2 Press 3 or 4 to select the CHANNEL SETUP menu, then press ENTER.

The CHANNEL SETUP menu will appear.

SET CLOCK
TIMER RECORD		AUTO CHANNEL SEARCH
		CHANNEL SOURCE:
CHANNEL SETUP		ADD/DEL CH:
		INPUT SELECT:
VCR SETUP
SELECT	ENTER
TO EXIT PRESS

3then press 1 or 2 to select TUNER.

Press 1 or 2 repeatedly to switch among TUNER, LINE1 and LINE2.4 to choose the CHANNEL SOURCE item,Press

Press 3 or 4 to choose the AUTO CHANNEL	SEARCH
4 item, then press 1 or 2 to set the channel.

16