Clock and Sleep Timer

Alarm

Radio

Setting the Clock

Setting the Alarm

Tuning the AM or FM Radio

1.Press the Power button to turn the unit off.

2.Press and hold the Stop/Clock button until the display begins to blink, then release the button.

3.Press the Tune +/- buttons to adjust the hour.

The PM indicator will light when the hour is set in the PM.

4.Press the Stop/Clock button.

5.Press the Tune +/- buttons to adjust the minute.

6.Press the Stop/Clock button to finish setting the time.

Setting the Sleep Timer

1.Follow the instructions for Setting the Clock.

2.Press the Snooze/Sleep button repeatedly to set the sleep timer ( 90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF ).

3.Once the set sleep time has expired the clock radio will automatically power off.

CD

Loading a CD

1.Open the CD Door.

2.Place a CD into the boombox, label side facing up.

3.Close the CD Door.

Playing a CD

1.Follow the instructions for Loading a CD.

2.Press the Source button to switch to CD mode.

3.Press the Play/Pause button to begin playing the loaded CD.

Programming a CD

1.Follow the instructions for Loading a CD and Playing a CD.

2.Press the Stop button to stop the CD during play.

3.Press the Program button.

“1--” will begin to blink on the display.

4.Press the Tune +/- buttons to select a track.

5.Press the Program button to save the selected track to the program.

6.Repeat steps 4 and 5 to program up to 20 tracks.

1.Press the Power button to turn the unit off.

2.Press and hold the Al1 or Al2 button until the display begins to blink, then release the button.

3.Press the Tune +/- buttons to adjust the hour.

The PM indicator will light when the hour is set in the PM.

4.Press the the Al1 or Al2 button.

5.Press the Tune +/- buttons to adjust the minute.

6.Press the the Al1 or Al2 button.

7.Press the Tune +/- buttons to switch between Buzzer, AM

Radio, FM Radio and CD.

The display will indicate the following: rF-FM Radio, rA-AM Radio, bb-Buzzer and Cd-CD.

Use the Vol+/- buttons to adjust the volume of the alarm, except when set to Buzzer.

8.Once the set alarm time is reached, the alarm will sound.

To set the other alarm, follow the above steps and choose the alarm not currently set.

Cancelling the Alarm

1.Follow the instructions for Setting the Alarm.

2.Press the Al1 or Al2 button until the indicator is no longer lit.

Snooze and Alarm Reset After the alarm sounds:

Press the Snooze/Dimmer button to delay the alarm for several minutes.

OR

Press the Power button to turn the alarm off until the set alarm time is reached again.

AUX input

Using the Audio Input

Requires a 3.5mm audio cable (not included).

1.Connect a 3.5mm audio cable to the

AUX Input and the audio output on an MP3 player or other audio device.

2.Press the Source button to switch to AUX mode.

3.Use the native controls on the connected MP3 player or other audio source to play your audio through the CD Clock Radio.

1.Press the Power button to turn the unit on.

2.Press the Source button to switch between the AM and FM radio mode.

3.Press the Tune +/- buttons to adjust the radio to the desired frequency.

4.Press and hold the Tune +/- buttons to search for the next available frequency.

5.Press the Vol+/- buttons to adjust the volume.

6.Press the Power to turn the radio off.

Saving a Station as a Preset

1.Follow the instructions for Tuning the AM or FM Radio.

2.Tune to the desired station.

3.Press the Al 2/Program button. The display will flash.

4.Press the Tune +/- buttons to set as P1

- P10.

5.Press the Al 2 /Program to finish setting the station as a preset.

Tuning to a Preset Radio Station

1.Follow the instructions for Tuning the Radio and Saving a Station as a Preset.

2.Press the Play/Pause/Mem+ button to cycle through preset radio stations.

Radio Reception

Extend the FM Antenna to improve FM radio reception.

An AM antenna is built into the clock radio. To improve AM radio reception, adjust the position of the clock radio.

USB

Charging a Device with the USB Port

Requires a USB cable (not included).

1.Make sure the unit is plugged into the wall.

2.Using the appropriate USB charging cable (not included), connect one end to the device and the other

to the USB Port on the unit.

Refer to the user’s manual for your specific device for manufacturers required charging amperage as well as determining the appropriate cable for your device before charging.

3.The device will now charge.

Note: Refer to the user’s manual for your specific device for manufacturers required charging amperage. High-ameperage devices such as iPads will not charge.

International Support

To download this User’s Guide in

Para descargar este Manual del

English, Spanish, or French, or to get

Usuario en inglés, español y francés, o

answers to frequently asked questions,

para obtener respuestas a preguntas

visit the support section at:

frecuentes, visite la sección de apoyo en

www.gpx.com

www.gpx.com

For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com

Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français,

ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur

www.gpx.com

Customer Service: 1-888-999-4215

Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.

Page 2
Image 2
GPX CC312B Clock and Sleep Timer Alarm Radio, AUX input, PM indicator will light when the hour is set in the PM