Operations
1Projection Display
The Projection Display projects the time onto wall.
2Projection Button
Press the Projection Button to activate the Projection Display.
3Power Button
Press the Power Button to turn the unit off and on.
4Radio/N1/N2/Line In Switch
Adjust the Radio/N1/N2/Line In Switch to switch between radio, nature sound 1 or 2, and Line Input mode.
5AL 1 & AL 2 Button
Press and hold the AL 1 & AL 2 Buttons, while the unit is powered off to set alarm 1 and alarm 2. Press the AL 1 & AL 2 Buttons, with the unit powered on, to activate alarm 1 and alarm 2.
6Snooze
Press the Snooze Button after the alarm sounds to delay the alarm for an additional 9 minutes.
7Tuning Dial
Turn the Tuning Dial to adjust the AM and FM radio station.
8Volume Dial
Turn the Volume Dial to adjust the volume of audio output from the unit.
9Line Input
Use the Line Input to connect an MP3 player or other audio device to the unit.
10Focus Dial
Turn the Focus Dial to focus the light from the Projection Display.
11Rotate Projection Dial
Turn the Rotate Projection Dial to adjust the angle of the Projection Display.
12Reverse Button
Press the Reverse Button to reverse the projection from the Projection Display.
13Dimmer Button
Press the Dimmer Button to dim the LCD Display.
14AM/FM Switch
Adjust the AM/FM Switch to switch between AM and FM radio when in radio mode.
15Hour & Minute Buttons
Press the Hour & Minute Buttons when setting the time or alarm.
16Time Button
Press and hold the Time Button with the unit turned off to adjust the time.
17Sleep Button
Press the Sleep Button to set the sleep timer between
18Alarm 1 & Alarm 2 Switch
Adjust the Alarm 1 or Alarm 2 Switch to set alarm #1 or alarm #2 to wake to the radio, nature sound 1 or 2, or the buzzer.
19FM Wire Antenna
Use the FM Wire Antenna to improve the reception of the FM radio.
20AC Power Cable
Plug the AC Power Cable into a standard AC outlet (120V~60Hz) to power the unit.
