![](/images/new-backgrounds/1201158/2011585x1.webp)
Important Safety Instructions
1.Read these instructions. All the safety and operating instruction should be read before the product is operated.
2. Keep these instructions. The safety and operating instruction should be retained for future reference.
3. Heed all warnings. All warning on the product and in the operating instructions should be adhered to.
4. Follow all instructions. All operating and use instructions should be followed.
5. Water and Moisture: Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement, or near a swimming pool, and the like. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
6. Cleaning: Clean only with a dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
7.Ventilation: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other simi- lar surface. This product should not be placed in a
8. Heat: Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Grounding or Polarization: Do not defeat the safety purpose of the polarized or
10.
11. Accessories: Only use attachments/ac- cessories specified by the manufacturer. Do not place this product on an unstable cart, stand tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting ac- cessory recommended by the manufacturer.
12. A product and cart combination should be moved with care. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when mov- ing the cart/apparatus combination to avoid injury from
13. Lightning: Unplug this apparatus and disconnect the antenna or cable system during lightning storms or when unused for long periods of time. This will prevent damage to the product due to lightning and
14. Servicing: Do not attempt to service this product yourself as opening or removing cov- ers may expose you to dangerous voltage or other hazards . Refer all servicing to qualified service personnel.
15. Power Sources: Only connect to the type of
16.Overloading: Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry: Never push objects of any kind or spill liquid into this product through openings as this could result in a risk of fire or electric shock.
18. Replacement Parts and Safety Check: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer. Ask the service technician to perform safety checks to ensure proper operation to avoid possible fire, electric shock, or other hazards.
19.Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and
Electrical Code, ANSI/NFPA 70, provides in- formation with regard to proper grounding of the mast and supporting structure, grounding of the
20.Wall or Ceiling Mounting: The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
21. Where the AC plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily oper- able.
22.Protective Attachment Plug: The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replace- ment or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.
23. Power Lines: An outside antenna sys- tem should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.