Setup
Connecting a TV Antenna
Requires a TV antenna (not included).
1.Connect a VHF, UHF, or HDTV antenna to the RF Input on the television.
2.Press the Source button to switch to TV mode.
3.Press the Setup button to access the setup menu.
4.Press the Arrow () buttons to highlight the CHANNEL icon. Press the Enter button.
5.Press the Arrow () buttons to highlight Air/ Cable. Press the Arrow () buttons to select AIR.
6.Press the Arrow () buttons to highlight AUTO SCAN. Press the Enter button to begin scanning for available channels.
Connecting Basic Cable
Requires a cable connection.
1.Connect a cable to the RF Input on the television.
2.Press the Source button to switch to TV mode.
3.Press the Setup button to access the setup menu.
4.Press the Arrow () buttons to highlight the CHANNEL icon. Press the Enter button.
5.Press the Arrow () buttons to highlight Air/ Cable. Press the Arrow () buttons to select
CABLE.
6.Press the Arrow () buttons to highlight Auto Scan. Press the Enter button to begin scanning for available channels.
Connecting a Set-Top box
Requires a
If your Set-Top Box has an HDMI Output:
•Connect the HDMI output on the
If your Set-Top Box has a Composite Video Output:
•Connect the video output on the
If your Set-Top Box has a Component Video Output:
•Connect the component video output on the
After connecting your Set-Top Box:
•Press the Source button to switch to AV/Component (YPrBr) or HDMI 1, 2 or 3 to match the connection used.
8
